Installation guide

EN | 23
Bosch Security Systems | 2005-09 | V3.0 Monitoring with VIDOS IntuiKey
Installation and Operating Manual | VIDOS IntuiKey
Calling up a camera preset
Fixed positions can be set for controllable cameras. You can enter these so-
called presets yourself using the Camera Control soft key. You can call up
presets as soon as the camera is connected to the active monitor.
1. Press Shot.
The prompt Go to setting appears in the status display.
2. Enter the number of the desired preset.
If you make a typing error, press Clr and enter the number again.
3. Press
↵ (Enter) to confirm the entry.
The camera moves to the selected position.
Soft keys
The soft keys are available for selecting from menus or for choosing other
commands. The function of a soft key can change. It depends on which menu is
currently active.
The current function of a soft key is always indicated in the soft key display.
The upper section of the soft key display always shows the following commands:
The functions of the keys in the lower section of the display change depending
on the selected menu.
Main Menu
Camera
Control
Site map
navigation
Replay