Installation guide

EN | 17
Bosch Security Systems | 2005-09 | V3.0 Installation and Setup
Installation and Operating Manual | VIDOS IntuiKey
Setting up users and authorizations
The control panel allows you to log into VIDOS as a user.
Users and authorizations are set up in VIDOS (for details, see the separate
documentation V
IDOS). Note that for users who will log in using VIDOS IntuiKey,
the login name and password must consist exclusively of figures.
Example: Name 2508, Password 1905.
It is always necessary to log in using the control panel if the Authorization
required dialog box appears in VIDOS.
Login is also necessary if the previous user pressed the Log off soft key in the
main menu (this corresponds to the Change user operation in VIDOS).
Note
Make sure that users with extended authorizations log off in this way after
completing their work on the VIDOS IntuiKey, so that subsequent users
cannot perform any unauthorized actions.
Final steps
Before you transfer the workstation to the user, note the following:
 Test the control panel on the workstation under genuine conditions.
Have the work area tested by someone else.
 Make sure that if site map based operation is to be used on the PC, no
screensaver is active. The user will not be able to exit it.