Installation guide

EN | 8
Installation and Setup Bosch Security Systems | 2005-09 | V3.0
Installation and Operating Manual | VIDOS IntuiKey
Installation
Below, you will find a brief overview of the installation and connection of the
control panel. For complete information, refer to the
DEVICE DOCUMENTATION FOR
THE BOSCH INTUIKEY CONTROL PANEL.
Purchasing and entering a license
In order to be able to use the BOSCH IntuiKey digital control panel in conjunction
with VIDOS, you must purchase the corresponding license. Once you have
obtained the activation code for BOSCH IntuiKey and entered this in the License
Viewer, you can add the control panel to the VIDOS system as a new device.
For detailed information about licensing, refer to the Q
UICK INSTALLATION GUIDE
supplied with the VIDOS Pro Suite product CD.
Integrating the control panel into VIDOS
For detailed information about integrating the control panel into the VIDOS
system, refer to the user guide for VIDOS in the section entitled I
NTEGRATING THE
B
OSCH INTUIKEY DIGITAL CONTROL PANEL, here is a brief summary:
1. Start the VIDOS program.
2. Click on System > Configuration….
You will see the Configuration window.
3. Right click on Devices and select New.
You will see the Select object selection dialog.
4. In this dialog box, select Bosch IntuiKey.
5. Click on OK.
You will see the General tab in the Create new Bosch IntuiKey dialog box.
6. Give the device a descriptive name and if necessary enter a description.
7. Click on the Device tab.
8. Enable the device by checking the field in front of Receive Commands from
Keyboard.
9. Select the COM port used to connect the control panel to the PC.