Technical data

Integrus Configuration | en 57
Bosch Security Systems B.V. Installation and Operation manual IOM-INT | V1.1 | 2010.12
The sensitivity screens also displays a level meter for a visual indication of the actual signal
strength: = low level, = high level, = overflow.
7.2.11 Enable / disable IR-monitoring
The mini IR-radiator at the front of the transmitter can be used for monitoring the IR-signal.
When required (e.g. for security reasons) this option can be switched off (menu 4M).
7.2.12 Enable / disable headphone output
The headphone output at the front of the transmitter can be used for monitoring the input-
and channel signals. When required (e.g. for security reasons) this option can be switched off
in menu item 4N.
7.2.13 Choose transmitter name
The transmitter can be assigned a user-defined name. This name is used in the Transmitter
Status screen. The name can be edited in the Unit Name menu (4O).
7.2.14 Reset all options to factory default values
Use menu item 4P to reset all options to the factory defaults. The user defined transmitters
name, the user defined language names and the transmission mode are not reset. (The default
values are indicated by an asterisk (*) in the menu descriptions.)
- All -6 ... +6 dB Set the sensitivity of all audio inputs to a user
defined level.
- Per Input ... Select this option to go to the ‘Per Input
Sensitivity Settings’ menu.
Menu Item Options Value Description
Menu Item Options Description
4M Mini Radiator Enabled Enable the mini IR-radiator at the front of the
transmitter.
Disabled Disable the mini IR-radiator at the front of the
transmitter.
NOTICE!
The mini IR-radiator and the headphone output can also be permanently disabled by removing
two resistors. Consult your regular service contact for more information.
Menu Item Options Description
4N Headphone Enabled Enable the headphone output at the front of
the transmitter.
Disabled Disable the headphone output at the front of
the transmitter.
Menu Item Options Description
4O Unit Name Name:
- Free text Assign a user defined name to the transmitter
(max. 16 characters). The default name is
‘Transmitter’.