Technical data

Integrus Configuration | en 55
Bosch Security Systems B.V. Installation and Operation manual IOM-INT | V1.1 | 2010.12
7.2.7 Disable or enable carriers
Normally the channels are automatically assigned to the available carriers. However, when the
reception quality of a specific carrier is not good, that carrier can be disabled manually. The
channels are then automatically re-assigned to the next available carriers. Each of the 8
carriers (0 to 7) can be disabled or enabled in the Carrier Settings menu (4G).
7.2.8 View carrier assignments
With menu option 4H the carrier assignment can be seen, i.e. which channels are transmitted
on each carrier. Note that the number of channels that can be distributed on one carrier
depends on the chosen quality mode. See examples below.
- ISO language names Choose from pre-programmed ISO language
names.
- User defined names Up to 32 user defined names (max. 12
characters) can be added and chosen.
Menu Item Options Description
4E Language List Language:
* English Present language list in English.
French Present language list in French.
Original Present each language name in it’s original
language (e.g. English, Français, Deutsch,
etc.).
Menu Item Options Description
Menu Item Options Description
4G C.Settings ... Push the button to go to the sub-menu.
4G Carrier n Carrier nr.:
0 ... 7 Select which carrier to configure.
Status:
- Disabled The selected carrier is disabled (off).
* - Enabled The selected carrier is enabled (on).
Channels 4, 5, 6, and 7
(all Mono MQ) are
assigned to carrier 1.
Channels 16 and 17 (both Mono
MQ) are assigned to carrier 4.
Room for more channels on same
carrier.
Channels 18 and 19 (both Mono
PQ) are assigned to carrier 5.
Menu Item Options Description
4H C.Overview ... Push the button to go to the sub-menu.
4H Carrier n Carrier nr.:
0 ... 7 Select which carrier to view.