User Manual

32 | English
F 016 L70 825 | (23.11.12) Bosch Power Tools
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Additionally be aware of your product’s software version (see
“Menu > Settings > System Options > Info”).
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [e-mail]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Garden product
leaves ragged finish
Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging Check underneath the garden product and clear out
as necessary (always wear gardening gloves)
Areas left uncut Time slot not long enough for garden size Incease mowing time slot
Battery duration Contact your Bosch Service Centre
Distance between obstacles sourrounded by
perimeter wire is less than 1 m
Increase distance between perimeter wire
Note: Obstacles with a height of more than 6 cm do
not require to be wired
Rough lawn conditions Increase/decrease cutting lane proximity from “mow
settings”
Excessive vibra-
tions/noise
Blade nut/bolt loose Tighten blade nut/bolt
Cutting blade damaged Replace the blade
No charging proce-
dure possible
Charging pins corroded Clean the charging pins
Possible internal fault Contact your Bosch Service Centre
Garden product un-
able to dock
Perimeter wire not correct aligned Check perimeter wire and align it
The LED on the
docking station does
not light up
Mains plug of power supply not plugged in
(properly)
Insert mains plug (fully) into the socket outlet
Possible faults with the socket outlet or mains
cable
Have the mains voltage supply checked by an author-
ized electrician
Power supply or docking station fault Have the power supply or docking station checked by
your Bosch Service Centre
Problem Possible Cause Corrective Action
OBJ_BUCH-1573-003.book Page 32 Friday, November 23, 2012 9:10 AM