BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:45 AM Page 2 General Power Tool Safety Warnings Read ali safety warnings and ali instructions. Failure fo follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safely measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do riot allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools arg dangerous in the hands of untrained users. Maintain power tools.
Remove battery pack before changing accessories. Accidental starting may occur because battery appliances with a battery inserted are in thi operative condition. Be prepared for a reaction torque when “seating” or removing a fastener. The screwdriver housing may tend to twist in the apposite direction of bit rotation when “seating” of removing a taster depending on the torque setting of the tool. Do not use dull or damaged impact sockets and accessories.
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:45 AM Page 5 IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to aerate the Symbols tool better and safer. Symbol Name Designation/Explanation W Volts Voltage (potential) A Amperes Current Hz Hart Frequency (cycles per second) Ww Watt Power kg Kilograms Weight min Minutes Time 5 Seconds Time Diameter Size of drill bits, grinding wheels, etc.
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:45 AM Page 6 Symbols (continued) IMPORTANT: Same of the following symbols may be used on your tool. Please study therm and meal their meaning. Proper interpretation of these symbols will allow you © operate the tool better and safer. his parabola designates that this tool is cited by Underwriters Laboratories. Sa This symbol designates that this tool is recognized by Underwriters Laboratories.
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Asia 7:48 AM Page 7 Functional Description and Specifications Fens Disconnect battery pack from tool before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally. Cordless Impact Wrench 7 o> VENTILATION / OPENINGS out Rut tryout ~ ] ome A, — Nodal TWIT 180 only HTH only & ’ VARIABLE SPEED TRIGGER SWITCH | \ RUBBERIZED LOCKING y i GRIP SLEEVE ee Hotel BUT 1 7 Pp THIMBU oly WORK LIG
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:45 AM Page B Assembly Disconnect battery pack Fens Attach only high quality A WARNING trim too! before making il accessories with the proper any assembly, adjustments or changing size square drive designed for use with impact accessories. Such preventive safety wrenches. measures reduce the risk of starting the tool accidentally.
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:45 AM Page § Operating Instructions VARIABLE SPEED CONTROLLED TRIGGER SWITCH Your tool is equipped with a variable sped trigger switch. The tool can be turned "ON or “OFF by squeezing or releasing the trigger. The speed can be adjusted from the minimum to maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed (Fig. 1).
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Asia 7:50 AM Page 10 Operating Tips INSTALLING FASTENERS To fasten: Start the fastener by hand its threaded counter part (E.G. nut on to bolt, bolt in to nut or threaded holey} Next. with the proper impact socket securely mounted to the wrench, slide the impact socket on to the nut or bolt head . Hold the tool securely with both hands and squeeze the trigger switch.
BM 2610034446 02-14 _IWHT180 HTH181 HTH182 Agi 4 7:50 AM Page 11 Maintenance Service NO USER SERVICEABLE A WARNING BN CITE maintenance performed by unauthorized personnel may resit in misplacing of internal wires and components which could cause serious hazard. We recommend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICEMEN: Disconnect tool and/or charger from power source before servicing.
