Specifications
A-5200-030-460
© 1991-1995 Radionics
74-06176-000-B 9/95
D5200 Programmer Operation Manual
Page 47
HANDLER NOT FOUND This message is displayed if the handler requested by the Receiving Program-
mer during an update was not available in the Sending Programmer, or the
handler was not found on the current disk when attempting to delete the handler.
HELP NOT FOUND This message is displayed if the help file requested by the Receiving Program-
mer during an update was not available in the Sending Programmer, or the help
file was not found on the current disk when attempting to delete the help file.
INVALID LOCK CODE This message is displayed if the panel lockcode does not match any of the
lockcodes programmed into the programmer. See the
Lockcodes
chapter for
more information.
NO HELP AVAILABLE There is no help screen for the particular program item or prompt selected, or the
help file for a particular handler has not been loaded.
Plug In Device If this message appears during a send (load) or receive (copy), check the
connection from the programmer to the device. Verify that one end of the
programmer cord is plugged into the D5200 Programmer cord, and the other end
is plugged into the device (panel, etc.).
RAM CARD NOT PRESENT This message is displayed if Disk B was selected and the RAM card is not
plugged into the programmer.
RAM DISK PROTECTED This message is displayed if Disk B was selected and the RAM card in the
programmer is write-protected.
READ ONLY RECORD This message is displayed if the record you are trying to replace or delete is
locked. Changes to a locked record can be saved only under a different name.
RECEIVE FAILURE This message is displayed if a communication error disrupts a copy process.
RECORD EXISTS This message is displayed if you are attempting to save a copied record under
a name which has already been given to a record on the current disk. Type in a
different title for the new file.
RECORD NOT DELETED This message is displayed if the record you are trying to delete is the last record
in the specific product handler database. The last record of each product handler
cannot be deleted.
RECORD NOT FOUND The record name entered does not match any record titles on the current disk.
The title must exactly match the title of a record stored on the current disk. If the
record title is not displayed, it may be stored on a different disk. See
Changing
the Disk
section in the
Disk Operations
chapter.
RECORD NOT REPLACED This message is displayed if the name entered in a REPLACE display does not
match any record titles on the current disk. Check the title entered in the NAME
field – it must exactly match the title of the record stored on the current disk.
SEND FAILURE This message is displayed if a communication error disrupts a load process.
UPDATE FAILURE This message is displayed if a handler transfer (RS-232 to RS-232 or TELCO to
TELCO) is not successful.