Specifications

D5200 Programmer Operation Manual

Page 42

74-06176-000-B 9/95

A-5200-030-420

5. To return to the Product Handlers level, press the red EXIT GROUP key.

12. Programmer Time Out

The D5200 Programmer is equipped with a power-saving timeout feature – the D5200

automatically powers down if no keys have been pressed within a programmed amount of

time. Follow the steps below to program the timeout.

1. Scroll to SECURITY in the Product Handlers menu using the red ↓ or ↑ keys, and press

the red ENTER GROUP key.

2. Scroll to Time Out in the SECURITY menu using the red ↓ or ↑ keys. Enter the desired

timeout value (from 02 to 10 minutes) and press the white ENTER key.

3. To exit the SECURITY menu, press the red EXIT GROUP key. The cursor returns to the

Product Handlers level.

Records Open When TimeOut Occurs

One minute before the D5200 goes into TimeOut power-down, the programmer emits a

"buzz", and the message 59 SEC TO POWER DOWN is displayed. The programmer "counts

down" until the time programmed in Time Out has expired. If a record is still open when the

D5200 Programmer goes into a power-down timeout, the record is saved under the title

TIMEOUTSAVE. One TIMEOUTSAVE record can be saved per handler. If a TIMEOUTSAVE

record already exists for a particular handler, the new TIMEOUTSAVE record will overwrite

the old TIMEOUTSAVE record.

When the programmer is switched on and the handler is entered, the programmer emits a

"buzz" tone, and the words SAVE TIMEOUT RECORD appear among the items in the

display. Press the red ↓ key to scroll to the TIMEOUTSAVE record. The TIMEOUTSAVE

record can be opened, saved under a different title, and deleted like other records (see

Editing

a Record, Copying a Record,

and

Deleting a Record

in the

Programming Records

chapter).