Specifications

A-5200-030-340
© 1991-1995 Radionics
74-06176-000-B 9/95
D5200 Programmer Operation Manual
Page 35
Updating using the Radionics Update System via the Phone
The programmer can be set up to receive handler updates from the Radionics Update System
via the phone (pulse dialing only). If the programmer already has the handler to be updated,
the Update System transfers only its locked records (i.e. NEWRECORD) to the programmer.
If the programmer does not currently contain the handler to be transferred, the Update
System transfers the handler and all locked records (i.e. NEWRECORD) to the programmer.
Connect the programmer to the phone line (TELCO port to phone jack) as shown in Figure
25, and set up the programmer as shown below.
1. Scroll to UPDATE in the Product Handlers menu using the red ↓ or ↑ keys, and press the
red ENTER GROUP key.
2. Type the handler name (i.e. 7112) at the Handler prompt, and press the white ENTER
key. The cursor moves down to the Include Help prompt.
3. The Include Help entry defaults to No. To include the handler help file in the update,
press the SPACE bar to toggle the entry to Yes. Press the white ENTER key. The cursor
moves down to the Phone prompt.
4. Enter the phone number of the Radionics Update System, 14087577832, in the Phone
field. (Add or remove prefix information as required for dialing from your area.) Press the
white ENTER key. The cursor moves down to the Mode prompt.
Figure 25: CONNECTING TO THE RADIONICS UPDATE SYSTEM
EXTERNAL
POWER
COMMUNICATOR AUXILIARY
RS-232
TELCO
D5200
PROGRAMMER
UPDATE
Phone: [phone]
Mode: TELCO -> A
PHONE NETWORK
RADIONICS
UPDATE
SYSTEM