Specifications

D5200 Programmer Operation Manual

Page 34

74-06176-000-B 9/95

A-5200-030-340

Disk to Disk Updates

Handlers and locked records can be copied from Disk A to Disk B (and Disk B to Disk A) in

the programmer. If the "receiving" disk already has the handler to be updated, the "sending"

disk transfers only its locked records (i.e. NEWRECORD) to the "receiving" disk. If the

"receiving" disk does not currently contain the handler to be transferred, the "sending" disk

transfers the handler and all locked records (i.e. NEWRECORD) to the "receiving" disk.

1. Scroll to UPDATE in the Product Handlers menu using the red ↓ or ↑ keys, and press the

red ENTER GROUP key.

2. Type the handler name (i.e. 7112) at the Handler prompt, and press the white ENTER

key. The cursor moves down to the Include Help prompt.

3. The Include Help entry defaults to No. To include the handler help file in the update,

press the SPACE bar to toggle the entry to Yes. Press the white ENTER key. The cursor

moves down to the Phone prompt.

4. Use the red ↓ key to scroll down to the Mode prompt.

To transfer a handler from internal Disk A to the removable RAM disk B: Press the SPACE

bar until the A→B selection is displayed (see Figure 24).

To transfer a handler from removable RAM Disk B to internal Disk A: Press the SPACE

bar until the B→A selection is displayed.

5. Press the white ENTER key. If the transfer is successful, the message UPDATE

SUCCESSFUL is displayed. The cursor returns to the UPDATE menu. To copy additional

handlers, repeat steps 2 through 5.

If the transfer is not successful, the message UPDATE FAILURE is displayed. If the

specified handler does not exist on the "sending" disk", the message HANDLER NOT

FOUND is displayed.

6. To return to the Product Handlers level, press the red EXIT GROUP key.

A → B

B → A

Figure 24: DISK TO DISK HANDLER COPY

UPDATE

Phone:

Mode: A -> B