Specifications

D5200 Programmer Operation Manual
Page 30
© 1991-1995 Radionics
74-06176-000-B 9/95
A-5200-030-300
8. Passwords
Access to several functions of the D5200 can be limited through the use of passwords. Eight
passwords can be programmed in the D5200. The D5200 Programmer is shipped with no
passwords initially entered. NOTE: This feature is password dependent . If the programmer
is logged onto with a password that does not have the authority to edit passwords, the
message ACCESS DENIED is displayed when trying to access this feature.
If you forget all of the programmed passwords in your D5200, the programmer must
be returned to Radionics (with an RMA number) for reinitialization. Please state on
the RMA that you are locked out of the programmer. All data on Disk A (the internal
battery backed RAM) is erased when the programmer is reinitialized.
To program passwords and designate authority to use certain functions of the D5200:
1. Scroll to SECURITY in the Product Handlers menu using the red ↓ or ↑ keys, and press
the red ENTER GROUP key.
2. Scroll to Passwords in the SECURITY menu using the red ↓ or ↑ keys, and press the
red ENTER GROUP key. The Passwords menu is displayed.
U1Password: Enter up to 8 characters for the User 1 password, and press the white
ENTER key. The User 1 password is automatically provided access to all D5200
functions, and must be programmed before additional passwords (for User# 2 through
8) can be programmed.
User#: The remaining fields are indexed programming fields. Enter the user number (2
through 8 – the default for the first round of programming is 2), and press the white
ENTER key. The # in the U#Password field changes to match the number programmed
in the User# field.
U#Password: The # in this field name changes to the number programmed in the User#
field. (The default is U
22
22
2Password for the first round of programming.) Enter up to 8
characters for the User # password, and press the white ENTER key.
In the following program items, typing Y and pressing the white ENTER key enables the
function for the U#Password. An entry of N disables the function for the U#Password.
Pressing the SPACE bar toggles between Y and N.
U#PasswordEnable: Enter Y to enable the U#Password. Enter N to disable the
U#Password. If this program item is set to N, entering this password will not be accepted
as valid on programmer power-up.
U#Delete Record: Enter Y to give U#Password the authority to delete records. Enter N
to disable this function for U#Password.
U#Delete Handler: Enter Y to give U#Password the authority to delete handlers. Enter
N to disable this function for U#Password.
U#Edit Lockcodes: Enter Y to give U#Password the authority to change panel
lockcodes. Enter N to disable this function for U#Password.
U#Edit Passwords: Enter Y to give U#Password the authority to change passwords.
Enter N to disable this function for U#Password.
U#Edit Vis/Invis: Enter Y to give U#Password the authority to make program items
invisible. Enter N to disable this function for U#Password.