Specifications

D5200 Programmer Operation Manual
Page 25
© 1991-1995 Radionics
74-06176-000-B 9/95
A-5200-030-240
Making Program Items Invisible (VISMODE)
Program items, categories, and modules in each handler can be made invisible using
VISMODE. NOTE: This feature is password dependent . If the programmer is logged onto
with a password that does not have the authority to make program items invisible, the
message ACCESS DENIED is displayed when trying to access this feature. To make a
program item, category, or module invisible:
1. Select a product handler from the Product Handlers menu using the red ↓ or ↑ keys, and
press the red ENTER GROUP key.
2. Select VISMODE using the red ↓ or ↑ keys, and press the red ENTER GROUP key.
3. Enable VISMODE by typing Y at the VisMode prompt, and pressing ENTER.
4. Press the red EXIT GROUP key to return to the Records level.
5. Select a record and press the red ENTER GROUP key. Program items, categories, and
modules cannot be made invisible for locked records such as NEWRECORD.
(NEWRECORD can be unlocked.)
6. For product handlers with modules: The letter V appears to the right of each module title.
To make the entire module invisible, press the letter I and the white ENTER key. To make
an invisible item visible, use the letter V. The I and V entries can be toggled by pressing
the SPACE bar. To leave a module visible and make items within the module invisible,
scroll to the appropriate module using the red ↓ or ↑ keys, and press the red ENTER GROUP
key.
7. For modules with categories: The letter V appears to the right of each category title. To
make the entire category invisible, press the letter I and the white ENTER key. To make
an invisible item visible, use V. I and V can be toggled by pressing the SPACE bar. To
leave a category visible and make program items within the category invisible, scroll to
the category using the red ↓ or ↑ keys, and press the red ENTER GROUP key.
8. At the program item level, the letter V appears to the right of the program item prompt –
where program item data would normally be entered (see Figure 18). To make the item
invisible, press the letter I and the white ENTER key. To make an invisible item visible,
use V. I and V can be toggled by pressing the SPACE bar.
9. When the desired program items, categories, and modules have been made invisible,
return to the VISMODE display. (The VISMODE display is reached by using the red EXIT
GROUP key to exit to the Record level, and selecting the VISMODE using the red ENTER
GROUP key.) NOTE: The record is automatically REPLACED with the vismode information
when the record is exited. Set VISMODE to No by pressing N or the SPACE bar, followed
by the white ENTER key. Press the red EXIT GROUP key to return to the Records level.
10. Verify that each program item, category, and module designated invisible does not
appear by reviewing the record.
Phone
Phone 1 V
Modem Format I
V
Figure 18: MAKING A PROGRAM ITEM INVISIBLE