Specifications

D5200 Programmer Operation Manual

Page 11

74-06176-000-B 9/95

A-5200-030-100

Changing the Current Disk

At the Current Disk prompt in the DISKSTAT display, press the letter on the keyboard

which corresponds to the desired disk. Press the white ENTER key. (NOTE: The SPACE bar

cannot

be used to toggle between available disk drives.) The message LOGGED ON DISK!

is displayed, and the SizeKilobytes and FreeKilobytes fields are updated to reflect the status

of the new Current Disk.

To exit the DISKSTAT display, press the red EXIT GROUP key. The cursor returns to the

Product Handlers level of the Current Disk. NOTE: When the Programmer is switched on, the

Current Disk always defaults to disk A.

Formatting a Disk

The D5200 Programmer can be used to format the internal battery-backed RAM memory

(Disk A) and the removable RAM cards (Disk B). As shipped, the internal RAM Disk A is

already formatted. Each new removable disk (Disk B) used with the programmer must be

formatted. NOTE: This feature is

password dependent

. If the programmer is logged onto with

a password that does not have the authority to format disks, the message ACCESS DENIED

is displayed when trying to access this feature.

WARNING: All information stored on the disk will be lost when the disk is formatted!

1. Scroll to SECURITY in the Product Handlers menu using the red ↓ or ↑ keys, and press

the red ENTER GROUP key.

2. Scroll to the FormatDisk item in the SECURITY menu using the red ↓ or ↑ keys, and

press the red ENTER GROUP key.

3. The FormatDisk menu is displayed. Select the disk to be formatted by pressing the

corresponding disk letter and then pressing the white ENTER key. A warning message

is displayed. To abort the disk format process, type N. To continue with the format

process, press Y. If the format is successful, the message RAM FORMAT COMPLETED

is displayed.

FORMAT ABORTED: This message is displayed if N was typed at the Continue?

prompt, or if disk formatting failed.

RAM CARD NOT PRESENT: This message is displayed if Disk B was selected for

formatting and the RAM card is not plugged into the programmer.

RAM DISK PROTECTED: This message is displayed if Disk B was selected for

formatting and the RAM card in the programmer is write-protected.

4. To exit the FormatDisk display, press the red EXIT GROUP key. The cursor returns to

the SECURITY menu.

5. To exit the SECURITY menu, press the red EXIT GROUP key. The cursor returns to the

Product Handlers level.