Specifications

D5200 Programmer Operation Manual
Page 9
© 1991-1995 Radionics
74-06176-000-B 9/95
A-5200-030-80
Function Keys
Six function keys simplify the use of the programmer.
ON: The red ON key switches the programmer on. This key does not power down the
programmer. The D5200 is switched off by selecting 5200 OFF in the PRODUCT HANDLERS
menu, or it powers down automatically after the programmed Time Out time has elapsed.
HELP: The red HELP key switches the programmer into help mode. (See the
Help Mode
chapter for more information.)
CANCEL: The red CANCEL key erases unENTERed program item data and replaces it with
the previously entered data.
CLEAR: The red CLEAR key erases unENTERed or ENTERED program item data, and
replaces it with blank spaces.
RECV (COPY) : The red RECV (COPY) key initiates a transfer of data from a product into the
D5200 Programmer.
SEND (LOAD): The red SEND (LOAD) key initiates a transfer of data from the D5200 Programmer
to another product.
Data Keys
The white keys on the keyboard are used for data entry.
Helpful Tones
The D5200 Programmer emits four distinct sounds, which notify the user of key presses, data
acceptance/rejection, and system errors.
CLICK
A short, sharp click occurs every time a key is pressed. The programmer does not click when
the ON, CAP LOCK, and SHIFT keys are pressed.
PIP
A short, single frequency tone indicates that the key pressed or data entered was accepted.
TWEEDLE
A quick series of pips indicates that the key pressed or data entered was invalid or
inappropriate.
BUZZ
A sour, flat tone indicates a system error, except when entering a product. Panel not
connected to D5200, low battery condition, programmed Time Out elapsed, changing panel
series type, deleting handlers and records are examples.
090