Installation Guide

12
1. Lift the microwave, tilt it forward, and hook slots at
back bottom edge onto four lower tabs of the
mounting plate.
2. Rotate the front of the oven up against cabinet bottom.
3. Insert a self-aligning screw (item A) through top center
cabinet hole. Temporarily secure the oven by turning
the screw at least two full turns after the threads have
engaged.
4. Insert the two remaining self-aligning screws through
outer top cabinet holes. Turn two full turns on each
screw.
5. Tighten center screw completely.
6. Tighten the outer two screws completely to the top of
the microwave oven.
Note: While tightening screws, hold the microwave
oven in place against the wall and the top cabinet.
7. Install grease filters by sliding them into the side slots,
then pushing up and toward oven to lock (image
shows bottom view of appliance).