Specifications
Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).
Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without
notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.
Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.
For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904
© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH. 09/19
30" Downdraft
800 Series Downdraft – HDD80051UC
Flexible Blower Installation – Downward Exhaust Example
Application
• Downward exhaust option if ducting is more convenient with this
configuration
• Requires at least 18" of clearance to fit the blower and transition
• Can be used with optional Recirculation Kit, sold separately
• Elbow, ductwork, blower support structure frame not included
• Blower must be accessible for maintenance
• Can also be installed with inline and remote blowers
Required Accessories
DHG602DUC
600 CFM Flexible Integral
Blower
600 CFM flexible blower can
mount to downdraft or be used
as an inline blower, and can be
rotated to exhaust downward
or to sides
Required Blower
Optional Accessories
HDDREC5UC
Recirculation Kit for Downdraft
When ducting to the exterior is not
feasible, downdraft recirculation kit
allows filtered air to reenter
the kitchen while cooking
HDDFILTUC
Charcoal Filter Replacement for Recirculation Kit
for Downdraft
Maintain performance of Bosch downdraft
recirculation kit with timely replacement of
charcoal filter to capture and filter odors
HDD0RSP
30" Gas Cooktop Seal Kit for Downdraft
30" gas cooktop seal kit required for installation
with 30" gas cooktops
HDDSTRAN8
8" Side/Rear/Downward
Transition for Downdraft
8" Round transition enable
ducting to be at sides,
rear or below downdraft
for flexible configurations
to maximize your kitchen
design
NOTE: HDDSTRAN8 side/rear/
downward transition required for
side, rear or downward exhaust
applications with inline and
remote blowers.