Operation Manual

Tested for you in our cooking studio en
41
Grilling
Keep the appliance door closed when using the grill.
Never grill with the appliance door open.
Slide the universal pan into the oven at the indicated
shelf position with the wire rack attached. Dripping fat
will be collected. Ensure that the wire rack is positioned
correctly on the universal pan. ~ "Accessories"
on page 11
Note: When grilling very fatty items, do not slide the
universal pan in directly under the wire rack, but rather
at level 2.
When grilling, try wherever possible to use pieces of
food which are of a similar thickness and weight. This
will allow them to brown evenly and remain succulent
and juicy. Place the food to be grilled directly onto the
wire rack.
Use tongs to turn the pieces of food you are grilling. If
you pierce the meat with a fork, the juices will run out
and it will become dry.
Do not add salt to the food until after it has been grilled.
Salt draws water from the meat.
Notes
■ The grill element switches itself on and off
continuously; this is normal. The grill setting
determines how frequently this occurs.
■ Smoke may be produced when grilling.
Meat thermometer
You can cook accurately using a meat thermometer.
Read important notes on using the meat thermometer in
the corresponding chapter. There, you can find notes
on inserting the meat thermometer, the possible heating
types and additional information. ~ "Meat
thermometer" on page 18
Recommended setting values
You can find the ideal heating type for many meat
dishes in the table. Temperature and cooking time
depend on the amount, composition and temperature of
the food. Settings ranges are indicated for this reason.
Try using the lower values at first. You can increase the
temperature next time if necessary.
The setting values apply to chilled meat placed into the
cold cooking compartment. By doing so, you can make
energy savings of up to 20 per cent. If you preheat the
oven, you can reduce the indicated cooking times by
several minutes.
You can find information on roasts and default values
for weights in the table. If you wish to roast a heavy joint
of meat, you should definitely use a lower temperature.
If roasting several joints, use the weight of the heaviest
piece as a basis for determining the cooking time. The
individual pieces should be approximately equal in size.
As a general rule: the larger a roasting joint is, the lower
the cooking temperature and the longer the cooking
time.
Turn roasting joints and grilled items after approx. ^ to
Z of the indicated time.
If you wish to follow one of your own recipes, you
should use similar dishes as a reference. You can find
additional information in the tips on roasting, braising
and grilling attached to the settings table.
Remove unused accessories from the cooking
compartment. This will achieve the best possible
cooking results and energy savings of up to 20 per
cent.
Types of heating used:
■ % Top/bottom heating
■ 7 Circulated air grilling
■ ( Grill, large area
Dish Accessories/cookware Shelf posi-
tion
Type of
heating
Tempera-
ture in °C
Grill
setting
Cooking
time in
mins.
Pork
Joint of pork without rind, e.g. neck,
1.5 kg
Cookware, uncovered 2 7 180-190 - 110-130
Joint of pork with rind, e.g. shoulder, 2 kg Wire rack 2 7 190-200 - 130-140
Pork tenderloin steak, 1.5 kg Cookware, uncovered 2 7 220-230 - 70-80
Pork fillet, 400 g Wire rack 3 7 220-230 - 20-25
Smoked pork on the bone, 1 kg (with a lit-
tle added water)
Cookware, covered 2 7 210-230 - 70-90
Pork steaks, 2 cm thick Wire rack 5 ( - 2 16-20
Pork medallions, 3 cm thick Wire rack 5 ( - 3* 8-12
Beef
Fillet of beef, medium, 1 kg Wire rack 2 7 210-220 - 40-50
Pot-roasted beef, 1.5 kg Cookware, covered 2 7 200-220 - 130-160
Sirloin, medium, 1.5 kg Wire rack 2 7 220-230 - 60-70
Steak, 3 cm thick, medium Wire rack 5 ( - 3 15-20
Burger, 3-4 cm deep Wire rack 4 ( - 3 25-30
* Preheat
** Slide the universal pan in underneath at shelf position 2