Use & Care Guide
18
Setting
The end of the cooking time can be delayed by up to 23
hours and 59 minutes.
Example in the picture: It is 10:00, the set cooking time is
45 minutes and the dish should be ready at 12:00.
1.
Set the operating mode and temperature or level.
2.
Set the cooking time.
3.
Before starting the operation, touch the "End" text field.
The projected end time is highlighted white in the
display.
4.
Turn the rotary selector to set a later end time.
5.
Press the Start/Stop button l to start.
The time at which the appliance will start is shown in
the display.
The appliance is in standby mode. When the appliance
starts, the cooking time counts down in the display.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown in the display.
You can reset the cooking time using the "Cooking time"
text field or you can press the l Start/Stop button to
continue the operation without a cooking time.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Changing and cancelling
After starting the appliance, the end time can no longer
be changed.
If you want to cancel the cooking time and end time,
interrupt the operation by pressing the l Start/Stop
button. You can continue the operation without a cooking
time or end time.
Setting the timer
The timer runs alongside other settings. You can set it at
any time, even if the appliance has been switched off. It
has its own audible signal so that you can tell whether it
is the timer duration or a cooking time that has elapsed.
Setting
The timer duration always starts at zero minutes.
The higher the value, the greater the time steps when
setting the timer.
The maximum setting is 24 hours.
1.
Touch the | field.
The symbol lights up red. On the display, the timer
duration is shown in white and in focus.
2.
Set the timer duration using the rotary selector.
3.
Press the | field to start.
Note: After a few seconds, the timer will also start
automatically.
The timer duration counts down.
The timer remains visible in the display if the appliance is
switched off. When an operation is running, the settings
for this operation are shown in the foreground. When you
touch the | field, the timer duration is displayed for a
few seconds.
When the timer duration comes to an end, an audible
signal sounds and a note appears on the display. The
symbol is no longer lit up.
Tip: If the set timer duration is the duration for which you
wish to cook your food, use the cooking time. The time is
visible in the foreground and the appliance switches off
automatically.
Changing and cancelling
To change the timer duration, touch the | field. The
timer duration is displayed in white and in focus, and can
be changed by using the rotary selector.
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
U
PV
&RRNWLPH
(QG
)
7HPSHUDWXUH
%DNH
+HDWLQJPRGH
(QG
6WDUW
&RRNWLPH
PV
(QG