User Manual

12 | English
1 609 92A 2C9 | (24.10.16) Bosch Power Tools
Rated speed min
-1
6500 6500 8500
Grinding disc diameter, max.
mm 230 230 180
Thread of grinder spindle
M 14 M 14 M 14
Thread length (max.) of grinder spindle
mm 25 25 25
Reduced starting current
–  –
Rotatable main handle
– ––
Run-on Brake
– ––
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
5.2
5.1
5.3
5.2
6.0
5.9
Protection class
/II /II /II
Angle Grinder GWS ... 26-230
B
26-230
H
26-230
H
Article number
3 601 ... H56 3.. H56 1.. H56 L..
Rated power input
W26002600 2600
Output power
W17001700 1700
Rated speed
min
-1
6500 6500 6500
Grinding disc diameter, max.
mm 230 230 230
Thread of grinder spindle
M 14 M 14 M 14
Thread length (max.) of grinder spindle
mm 25 25 25
Reduced starting current
– ––
Rotatable main handle
 ––
Run-on Brake
– ––
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
6.2
6.1
6.1
6.0
6.1
6.0
Protection class
/II /II /II
Angle Grinder GWS ... 20-230
H
24-230
JVX
Article number 3 601 ... H50 1.. H64 5..
Rated power input
W 2000 2400
Output power
W 1250 1600
Rated speed
min
-1
6600 6500
Grinding disc diameter, max.
mm 230 230
Thread of grinder spindle
M 14 M 14
Thread length (max.) of grinder spindle
mm 25 18
Reduced starting current
– 
Rotatable main handle
– 
Run-on Brake
– 
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
5.2
5.1
6.5
6.4
Protection class /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Only for power tools without reduced starting current: Starting cycles generate brief voltage drops. Interference with other equipment/machines may
occur in case of unfavourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
Angle Grinder GWS ... 24-230
H
24-230
JH
26-180
H
OBJ_BUCH-827-008.book Page 12 Monday, October 24, 2016 2:46 PM