2 609 931 878.book Seite 1 Donnerstag, 4. November 2004 8:06 08 GST 85 P GST 85 PE GST 85 PAE PROFESSIONAL Bedienungsanleitung Operating instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning Bruksanvisning Brukerveiledningen Käyttöohje Οδηγία χειρισµού Kullan∂m k∂lavuzu * Des idées en action.
609 931 878.book Seite 2 Donnerstag, 4. November 2004 8:06 08 2 • 2 609 931 878 • 04.
2 609 931 878.book Seite 3 Donnerstag, 4. November 2004 8:06 08 2 600 793 009 (Ø 19 mm, 3 m) 1 610 793 002 (Ø 19 mm, 5 m) MT 300 WP: 0 603 037 103 2 608 190 010 (GST 85 P/ GST 85 PE) 2 600 306 005 2 607 001 069 2 607 001 082 (GST 85 PAE) 2 607 010 079 (5 x) 2 607 001 201 (GST 85 P/ GST 85 PE) 2 605 438 212 2 602 317 031 (1,4 m) 2 602 317 030 (0,7 m) 3 • 2 609 931 878 • 04.
2 609 931 878.book Seite 2 Donnerstag, 4. November 2004 8:06 08 2 1 3 4 5 6 7 9 8 4 • 2 609 931 878 • 04.
2 609 931 878.book Seite 3 Donnerstag, 4. November 2004 8:06 08 B C 19 20 21 22 18 17 0 15 30 45 8 15 D E 23 F 5 • 2 609 931 878 • 04.
2 609 931 878.book Seite 1 Donnerstag, 4. November 2004 8:06 08 Tool Specifications Jigsaw GST 85 P PROFESSIONAL 0 601 584 1.. [W] [W] [spm] [mm] 580 350 3 100 26 – ● ● GST 85 PE PROFESSIONAL 0 601 584 6.. GST 85 PAE PROFESSIONAL 0 601 584 8.. 580 350 500 – 3 100 26 ● ● ● [mm] [mm] [mm] [°] 85 20 10 0 – 45 85 20 10 0 – 45 [kg] 2.4 2.
2 609 931 878.book Seite 2 Donnerstag, 4. November 2004 8:06 08 Noise/Vibration Information Measured values determined according to EN 60 745. Typically the A-weighted sound pressure level of the machine is 83 dB (A). Measurement uncertainty K=3 dB. When working, the noise level can exceed 85 dB (A). Wear hearing protection! The typically weighted acceleration is 4 m/s2. For Your Safety Read all instructions.
2 609 931 878.book Seite 3 Donnerstag, 4. November 2004 8:06 08 Turn the rotatable top handle 1 approx. three rotations in counterclockwise direction. Insert the saw blade 11 in the stroke rod crosswise to the cutting direction. Turn the serrated edge of the saw blade to the cutting direction. Slightly lift the saw blade so that the back of the saw blade comes to rest in the groove of the guide roller 10. Allow it to notch by pulling slightly.
2 609 931 878.book Seite 4 Donnerstag, 4. November 2004 8:06 08 Adjusting the Cutting Angle (see figure A ) Replaceable Base-plate Covers (GST 85 PAE – see figure C ) GST 85 PAE: Remove the cover guard 12 and open the slider 22 at the bottom side of the base plate. After loosening the screw 15 and sliding lightly forward in the direction of the saw blade, the base plate 8 can be swung to the right or left to a maximum of 45°.
2 609 931 878.book Seite 5 Donnerstag, 4. November 2004 8:06 08 Tips Maintenance and Cleaning For tight curves it is best to use a narrow saw blade. When sawing metal or similar materials, apply coolant/lubricant alongside the cutting line. Circle Cutter/Parallel Guide (Accessory – see figures D – E ) With the combined circle cutter/parallel guide 23, circular cutouts or parallel cuts in materials of up to 30 mm thickness can be made.
2 609 931 878.book Seite 6 Donnerstag, 4. November 2004 8:06 08 Environmental Protection Recycle raw materials instead of disposing as waste The machine, accessories and packaging should be sorted for environmental-friendly recycling. These instructions are printed on recycled paper manufactured without chlorine. The plastic components are labelled for categorised recycling. Australia and New Zealand Robert Bosch Australia Pty. Ltd. RBAU/SPT 1555 Centre Road P.O. Box 66 3168 Clayton/Victoria ✆ ..........
2 609 931 878.book Seite 1 Donnerstag, 4. November 2004 8:06 08 * Des idées en action. Chlor Robert Bosch GmbH Geschäftsbereich Elektrowerkzeuge 70745 Leinfelden-Echterdingen www.bosch-pt.com 2 609 931 878 (04.
