Operating instructions

English | 13
Bosch Power Tools 2 609 932 837 | (12.12.11)
Maintenance and Cleaning
f For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 16, page 181).
Check the guide roller
regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 17, page 181).
Adjusting the Cutting Angle
5 173–174
Mounting the sliding shoe
6 175
Mounting the splinter guard
7 175
Orbital Action Settings
8 176
Adjusting the stroke rate
preselection
9 176
Switching On and Off
10 177
Guide the power tool toward the
workpiece only when switched on
11 178
Lubrication when cutting metal
12 178
Plunge Cutting
13 178–179
Mounting and use of the parallel
guide
14 179–180
Selecting accessories
– 182–184
Action Figure Please observe Page
OBJ_BUCH-1027-002.book Page 13 Monday, December 12, 2011 11:45 AM