OBJ_DOKU-7115-002.fm Page 1 Monday, September 10, 2007 4:41 PM Robert Bosch Limitada Divisão de Ferramentas Elétricas Via Anhangüera, km 98 CEP 13065-90 - Campinas - SP SAC Grande São Paulo (11) 2126-1950 SAC Demais localidades 0800 70 45446 www.bosch.com.
OBJ_BUCH-2 609 140 291-001.
OBJ_BUCH-2 609 140 291-001.
OBJ_BUCH-2 609 140 291-001.
OBJ_BUCH-2 609 140 291-001.book Page 1 Thursday, July 7, 2005 8:36 AM General Safety Rules Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. WARNING Save these instructions. 1) Work area a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
OBJ_BUCH-2 609 140 291-001.book Page 2 Thursday, July 7, 2005 8:36 AM f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
OBJ_BUCH-2 609 140 291-001.book Page 3 Thursday, July 7, 2005 8:36 AM Assembly Technical Data Orbital sander GSS 23 AE PROFESSIONAL 3 601 K70 7.. W 190 Article number Rated power input Preselection of orbital stroke rate No-load speed rpm Orbital stroke rate opm Orbit diameter mm Sanding sheet dimensions — Adhesion via Velcro backing mm — Attachment via clamping mm Sanding plate dimensions mm Weight according to EPTA-Procedure 01/2003 kg Protection class z 7000–12000 14000–24000 2.
OBJ_BUCH-2 609 140 291-001.book Page 4 Thursday, July 7, 2005 8:36 AM Sanding Sheets without Velcro Backing (see figures B–D) n Press the release button 8 and keep it depressed. Replacing the Sanding Plate (see figure F) o Guide the sanding sheet 7 to the stop under the opened front clamping bracket 9 and let go of the release button 8 again. Pay attention that the sanding sheet is clamped centrally. Before any work on the machine itself, pull the mains plug.
OBJ_BUCH-2 609 140 291-001.book Page 5 Thursday, July 7, 2005 8:36 AM Maintenance and Service Maintenance and Cleaning Disposal Before any work on the machine itself, pull the mains plug. The machine, accessories and packaging should be sorted for environmental-friendly recycling. For safe and proper working, always keep the machine and ventilation slots clean.
