Safety Instructions

15
Accessories
I
f an extension cord is necessary,
a cord with adequate size
conductors that is capable of carrying the current
necessary for your tool must be used. This will
p
revent excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire extension
cords that have 3-prong plugs and receptacles.
NOTE: The smaller the gauge number, the heav i er the
cord.
R
ECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Tool’s
Ampere
Rating
Cord Size in A.W.G. Wire Sizes in mm
2
Cord Length in Feet Cord Length in Meters
25 50 100 150
15 30 60 120
3-6
6-8
8-10
10-12
12-16
18
18
18
16
14
16
16
16
16
12
16
14
14
14
–
14
12
12
12
–
0.75
0.75
0.75
1.0
–
0.75
1.0
1.0
2.5
–
1.5
2.5
2.5
4.0
–
2.5
4.0
4.0
–
–
Trouble Shooting Guide
Problem Checkpoint Remedy
Audio Unit doesn’t
function.
1. Is power cord properly connected ?
2. Is the Bosch battery pack installed or
inserted properly?
3. Does the battery need charging?
1. Plug in AC power cord.
2. Make sure battery is completely inserted.
3. Charge battery with battery charger (sold
separately).
It is noisy or weak in
radio receiving.
1. Is there any facility interfering with
the unit?
2. Is there any interference to the
internal FM antenna?
1. Move unit to new location away from
interference.
2. Turn the unit in different directions.
4-Way Power outlet
does not function
1. Is power cord properly connected?
2. Is green light illuminated on outlets?
1. Plug in AC power cord.
Does unit suddenly
fail to work
1. Is power cord properly connected
to unit?
2. Is the LCD displaying that there is
power to the unit?
1. Plug in power to unit.
2. Software in unit needs to be reset.
Remove all batteries from unit and unplug
AC power cord, wait for 30 seconds and
reconnect AC power cord. Or, press the
Volume/Clock button for longer than 1
seconds and RS appears. Turn the
Volume/Clock dial to choose between
Yes and No. Confirm your selection by
pressing Volume/Clock button.