Data Sheet

• Pulsed
• California March
• Wheelock Synch
• Gentex Synch
• System Sensor Synch
Status Displays
There are eight local status display LEDs on the power
supply's printed circuit board that show the following
conditions:
• AC OK
• System Trouble
• Ground Fault
• Input Active
• Trouble Output 1, 2, 3, and 4
DIP Switch Settings
If connected to the fire alarm control panel’s option
bus, the power supply needs its own option bus
address. Set this address through the DIP switches.
Set the DIP switches to choose:
• NAC or power supply output
• NAC Input Variable option
• AC Delay Time
Certifications and approvals
Region Certification
USA UL UOXX: Control Unit Accessories, System
(ANSI/UL 864, 9th edition) and UTRZ:
Power-supply Units (UL 1481)
FM FPP-RNAC-8A-4C
CSFM see our website
FDNY-
CoA
#6101
FDNY-
CoA
#6173
Installation/configuration notes
Compatible Products
The following products are compatible with the
FPP‑RNAC‑8A‑4C RNAC Power Supply:
Category Product ID Product Description
Batteries D126 12 V, 7 Ah battery
D1218
*
12 V, 18 Ah battery
D1224
**
12 V, 24 Ah battery
D1238
**
12 V, 38 Ah battery
*
Up to two 18 Ah batteries fit in the enclosure
**
Requires BATB-40 Battery Box
Magnetic Door Holders D370B Brass‑Plated
Wall‑Mount
D370C Chrome‑Plated
Wall‑Mount
D371B Brass‑Plated
Floor‑Mount
D371C Chrome‑Plated
Floor‑Mount
Four-wire Smoke
Detectors
Refer to Technogram (P/N: F01U010790)
NAC Devices Refer to Technogram (P/N: F01U010791)
Wiring
All wiring is connected to the power supply board by
lift‑gate terminals that can accept up to 12 AWG (ISO
4 mm
2
) wire.
Parts included
Quant. Component
1 FPP‑RNAC‑8A‑4C board
1 AE4 Large Enclosure (red), vented
1 Lock set with two #1358 (D102) keys (P/N: F01U083084)
4 2.21 kΩ end‑of‑line (EOL) resistors (P/N: F01U034504)
For retrofitting applications, allowable EOL values are in the
range of 1 kΩ to 20 kΩ
1 Hardware pack
Technical specifications
Environmental Considerations
Temperature (operating): +32°F to +120°F (0°C to +49°C)
Inputs (NAC)
Response Time (input to output): 10 ms maximum
Mechanical Properties
Color: Red
Dimensions (HxWxD)
without door:
20.4 in. x 14.8 in. x 4.1 in.
(52 cm x 38 cm x 10.4 cm)
Material: cold-rolled steel
Base: 18 gauge (1.2 mm)
Cover: 19 gauge (1.1 mm)
Outputs (auxiliary)
Current (output): 850 mA maximum
Voltage (output): 24 VDC (regulated)
Outputs (NAC)
Output per circuit: 2.5 A maximum
Output (total): 8 A (all NAC and auxiliary outputs)
Voltage (output): 24 VDC (regulated)
Voltage (standby): -24 VDC (regulated)
Outputs (NAC when configured as power supply)
Compatibility range: 19.6 VDC to 27.5 VDC
Current (output): 1.3 A maximum
2 | FPP‑RNAC‑8A‑4C Remote Notification Appliance Circuit (RNAC) Power Supply