Data Sheet

Fire Alarm Systems | FMR‑DACT‑KEYPAD DACT Keypad Programmer
The FMR‑DACT‑KEYPAD Programmer is a four‑wire
alphanumeric
liquid
crystal display (LCD) keypad used as a
programming device for Bosch Security Systems, Inc.
DACTs. The programmer is used for programming and
debugging only while it is connected to the DACT.
The FMR‑DACT‑KEYPAD keypad has a two‑line, 16‑character
display showing information on various DACT programming
functions. In most cases, the first line contains general
system status information; the second line describes the
specific programming menus and prompts.
Parts Included
Quant. Component
1 DACT keypad programmer
1 Info card slide
1 Instruction label
1 Programming plug (F.01U.034.338)
Technical Specifications
Eklectrical
Current
•
Alarm: 100 mA; 75 mA for battery calculation
•
Standby: 100 mA; 75 mA for battery calculation
Voltage (supply): 12 VDC nominal
Environmental
Usage: Indoor, dry
Relative Humidity: 5% to 85% at +86°F (+30°C), non‑condens-
ing
Temperature (operating): +32°F to +120°F (0°C to +49°C)
Mechanical
Dimensions: 5 in. x 6 in. x 1 in. (12 cm x 16 cm x 3 cm)
Ordering Information
FMR‑DACT‑KEYPAD DACT Keypad
Programmer
Four‑wire alphanumeric liquid crystal display
(LCD) keypad used as a programming device
for Bosch Security Systems, Inc. DACTs
FMR-DACT-KEYPAD
FMR‑DACT‑KEYPAD DACT Keypad
Programmer
▶
Four‑wire alphanumeric LCD keypad with two-line,
16‑character display
www.boschsecurity.com