FMM-462, FMM-462-D Installation Instructions EN Addressable Manual Fire Alarm Boxes
FMM-462, FMM-462-D | Installation Instructions | 1.0 1.0 Description These instructions cover the installation of Bosch FMM462 (Single Action) and FMM-462-D (Dual Action) Addressable Manual Fire Alarm Box in a fire system supervised by a Bosch Fire Alarm Control Panel (FACP). Install, test and maintain the FMM-462/FMM-462-D Addressable Manual Fire Alarm Box according to these instructions, NFPA 72, Local Codes and the Authority Having Jurisdiction (AHJ).
FMM-462, FMM-462-D | Installation Instructions | 3.0 4) Tighten each screw terminal down securely. Be careful not to strip the terminals by overtightening. Figure 1: FMM-462 Wiring 2.3 Specifications Installing the Glass Rod When installing the glass rod, use the following procedure: 1) Open the FMM-462/FMM-462-D using the key supplied with the unit. Inside, below the pulldown lever, there is a narrow slot for the rod to sit in. 2) Insert one end of the glass rod under the spring tab.
Bosch 130 Perinton Parkway Fairport, NY 14450-9199 USA Customer Service: (800) 289-0096 Technical Support: (888) 886-6189 © 2004 Bosch F01U001401B
