Data Sheet
Fire Alarm Systems | FMM‑462 POPIT Addressable Manual Stations
FMM‑462 POPIT Addressable Manual
Stations
www.boschsecurity.com
u Single‑gang mounting
u Latching alarm lever and key‑locked reset
u Rugged die‑cast housing with 14 gauge (1.9 mm)
plated steel back and corrosion‑resistant
construction
u Optional scored acrylic breakrod
The FMM‑462 Addressable Manual Stations allow
people evacuating a building to initiate an alarm and
alert others still inside.
The included POPIT module is addressed using on-
board slide switches. It is then connected to the
control panel’s data expansion loop. The POPIT is
polled by the control panel and sends reports on any
opens, shorts, or ground faults on the manual station's
wiring. The addressable feature allows the agencies
responding to alarm or trouble conditions to go to the
point that initiated the alarm or trouble report.
These low-profile manual stations are die cast with
rounded edges to fit most design applications. All
metallic components are painted or plated to inhibit
corrosion. These manual stations conform to the
Americans with Disabilities Act (ADA) standards.
Functions
Addressable Operation
The POPIT connects to a two‑wire data expansion
circuit from the control panel. Device address is set
through slide switches on the POPIT Module, allowing
programmable device identification by the control
panel.
Certifications and approvals
ADA Complies with Americans with
Disabilities Act ADA 4.28.3
NFPA Complies with National Fire
Protection Association NFPA 72
Region Certification
USA UL UNIU: Boxes, Non-Coded (UL38)
CSFM see our website



