Datasheet

FCP-500-PK
Quant. Component
1 FCP-500-P Four-wire Detector Head (transparent)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500 Four-wire Detector Base (six‑conductor)
1 FAA-500-TR-P Trim Ring (transparent)
16 Color insert rings
FCP-500-EK
Quant. Component
1 FCP-500 Four-wire Detector Head (white)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500-E Four-wire EOL Detector Base (six‑conductor)
1 FAA-500-TR-W Trim Ring (white)
FCP-500-EPK
Quant. Component
1 FCP-500-P Four-wire Detector Head (transparent)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500-E Four-wire EOL Detector Base (six‑conductor)
1 FAA-500-TR-P Trim Ring (transparent)
16 Color insert rings
FCP-500-CK
Quant. Component
1 FCP-500-C Four-wire Detector Head with CO Sensor
(white)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500 Four-wire Detector Base (six‑conductor)
1 FAA-500-TR-W Trim Ring (white)
FCP-500-CPK
Quant. Component
1 FCP-500-C-P Four-wire Detector Head with CO Sensor
(transparent)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500 Four-wire Detector Base (six‑conductor)
1 FAA-500-TR-P Trim Ring (transparent)
16 Color insert rings
FCP-500-CEK
Quant. Component
1 FCP-500-C Four-wire Detector Head with CO Sensor
(white)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500-E Four-wire EOL Detector Base (six‑conductor)
1 FAA-500-TR-W Trim Ring (white)
FCP-500-CEPK
Quant. Component
1 FCP-500-C-P Four-wire Detector Head with CO Sensor
(transparent)
1 FAA-500-BB-UL Flush-mount Back Box
1 FCA-500-E Four-wire EOL Detector Base (six‑conductor)
1 FAA-500-TR-P Trim Ring (transparent)
16 Color insert rings
Technical specifications
Detection Principle
FCP‑500(‑P): Scattered light measurement
FCP‑500‑C(‑P): Combination of scattered light measurement
and CO algorithm
Drift Compensation
All FCP‑500 detectors: Drift compensation for smoke sensor
baseline (optical sensors)
Environmental Considerations
Air Speed 300 ft/min (1.5 m/s) maximum
Humidity 95% (non-condensing)
Interference Immunity: According to UL 268
Operating Temperature +32 °F to +100 °F (0°C to +38°C)
Protection Category: FAP‑500(‑C): IP 53
FAP‑500(‑C)‑P: IP 33
Mechanical Properties
Color:
Detector Housing: White
Detector Front Plate: FCP-500(-C): white
FCP-500(-C)-P: transparent (color
inserts)
Dimensions (diameter x D)
Detector: 4.5 in. x 2.2 in. (11.4 cm x 5.6 cm)
Detector with Trim Ring: 5.9 in. x 2.2 in. (15 cm x 5.6 cm)
Detector with Trim Ring and
Base:
5.9 in. x 2.75 in. (15 cm x 7 cm)
Material: Polycarbonate
3 | FCP‑500 Conventional Flush‑mount Smoke Detectors