Technical data

Automatic Fire Detectors LSN improved
version
Accessories | en 27
Bosch Sicherheitssysteme GmbH Product Information F.01U.003.449 | 7.2 | 2010.05
Solo CO testing gas
Spray can with CO testing gas for multisensor detectors
with C sensor.
Contents: approx. 4 l compressed gas
DU = 12 pieces
SOLO461 Heat Detector Tester
The SOLO461 Heat Detector Tester is battery-operated
and conducts hot air to the heat detector sensor.
The SOLO461 uses patented CAT™ technology (Cross Air
Technology), which bundles the air and feeds it to the
sensor horizontally, regardless of the size or form of the
detector.
SOLO100 Telescopic Access Pole
The SOLO100 Telescopic Access Pole is used to install
and replace fire detectors on high ceilings. It can be
extended by three SOLO101 Fixed Extension Poles.
The telescopic access pole is suitable for applications in
high-voltage environments and was tested at a voltage of
20 kV in line with BS EN 61235 Part 12.
Length: 1 m to 3.4 m
SOLO101 Fixed Extension Pole
The SOLO101 Fixed Extension Pole is used to install and
replace fire detectors on ceilings.
It can be used on its own, with up to three other fixed
extension poles or with the SOLO100 Telescopic Access
Pole.
Length: 1 m
SOLO610 Test Equipment Bag
The SOLO610 Test Equipment Bag is made from strongly
woven polyester with a PVC coating and is suitable for
carrying or storing test and service products.