Technical data

26 en | Accessories
Automatic Fire Detectors LSN improved
version
F.01U.003.449 | 7.2 | 2010.05 Product Information Bosch Sicherheitssysteme GmbH
6.7 Service and Detector Test Accessories
SOLO200 Detector Removal Tool
The pivoting grips and three different diameters make
the SOLO200 Detector Removal Tool suitable for
removing and replacing most fire detectors.
The plastic caps enable the fire detector to be securely
gripped and protect the detector surface against
damage.
RTL-cap plastic caps for the SOLO200 Detector
Removal Tool
Scope of delivery = 2 pieces
FME-420-ADAP Tool Adapter for MS 420
The FME-420-ADAP Tool Adapter can be used in addition
to the SOLO200 Detector Removal Tool. The plastic bowl
and the adapter pole optimize the insertion and removal
of fire detectors when using detector bases with springs
(MS 420, FAA-MS 420-R-SP).
Note: Only use the plastic bowl in conjunction with the
adapter pole. On the adapter pole there is a rubber
bearing that cushions the turning motion when removing
the fire detectors and prevents damage.
SOLO330 Smoke Detector Tester
The SOLO330 Smoke Detector Tester is used to test
smoke detectors on site. A testing gas that simulates
smoke particles is used to do this.
Solo A3-001 Test Aerosol for Optical Smoke Detectors
Spray can with 250 ml test aerosol for optical smoke
detectors
DU = 12 pieces