Technical data

Automatic Fire Detectors LSN improved
version
Accessories | en 21
Bosch Sicherheitssysteme GmbH Product Information F.01U.003.449 | 7.2 | 2010.05
6 Accessories
6.1 Support Plate for Detector Identification
The support plates are made from 1.8 mm thick ABS plastic and are clamped between the
detector base and the ceiling.
6.2 SK 400 Protective Basket
6.3 SSK 400 Protective Dust Cover
TP4 400 Support Plate
The TP4 400 Support Plate is intended for an installation
height up to 4 m and is designed for labels up to a size of
approx. 65 x 34 mm.
TP8 400 Support Plate
The TP8 400 Support Plate is intended for an installation
height up to 8 m and is designed for labels up to a size of
approx. 97 x 44 mm.
15 /4
The SK 400 Protective Basket is installed over the detector
and gives the detector substantial protection against
damage.
If the detector is mounted in a sports facility, for example,
the protective basket prevents balls or other sports
equipment from hitting the detector and damaging it.
The SSK 400 Protective Dust Cover is necessary during
construction work to protect an installed detector base,
with or without detector module, from contamination. The
protective dust cover made of polypropylene (PP) is
pushed onto the installed detector base.