Installation manual

- 14 -
• Installation should only be performed by
skilled personnel
Hardware required:
• For ceiling mount:
1. Mounting Bracket, Model EXMB.029,
Qty = 1
2. ¼’’ x 2” Lag Screws, Qty = 1
3. ¼’’ Washer, Qty = 1
• For wall mount:
1. Mounting Bracket, Model EXMB.028,
Qty = 1
2. ¼’’ x 2” Lag Screws, Qty = 4
Tools required:
• Drill
• Stud Finder
• 5/32” Drill Bit
• Socket Driver
• 7/16” Socket
Mounting instructions for wall and ceiling mount:
Camera is intended to be securely mounted to a
wall using mounting bracket model EXMB.028, or
to a ceiling using mounting bracket model
EXMB.029. Camera has been evaluated for wall
mounting using the following wood screws
secured into a 2x4 stud under ½” drywall. Wood
screws, 1/4” lag, dia Ø1/4”, 2” long, 9 TPI, with ½”
head. Camera has been evaluated for ceiling