Data Sheet

Fire Alarm Systems | ET‑1010 Vandal‑resistant Speakers
ET‑1010 Vandal‑resistant Speakers
www.boschsecurity.com
u 25 VRMS or 70 VRMS operation up to 8 W
u Low average current draw
u Extra protection and improved audibility with
sealed‑back speaker construction and
vandal‑resistant grill
u Compatible with SM and DSM Synchronization
Modules
u Easy wiring with screw terminals
The Wheelock ET‑1010 Speakers meet the critical
needs of the life safety industry for voice and tone
signaling in both indoor and outdoor applications.
They have a vandal‑resistant die‑cast grill and a
sealed‑back speaker for extra protection.
The high‑efficiency speaker is designed for maximum
output at a minimum wattage across a frequency range
of 400 Hz to 4 kHz. It covers both 25 V and 75 V audio
systems with a series of wattage taps from 0.125 W to
8 W.
Certifications and approvals
Cooper Wheelock, Inc. holds these Listings and
Approvals:
Region
Certification
USA UL UUMW: Speakers and Amplifiers for Fire
Protective Signaling Systems (UL1480,
UL1711, and UL2043)
CSFM see our website
Installation/configuration notes
Compatible Products
The following products are compatible with the
ET‑1010 Speakers:
Category Product ID Product Description
Control
Panels
D7022
1
Conventional FACP
D7024
2
Addressable FACP
D7024 Conventional FACP
D8024
1
Analog FACP
D9124
1
Addressable FACP
D10024A
1
Analog FACP
FPD-7024
2
Addressable FACP
FPD-7024 Conventional FACP
Modules SM‑12/24‑R Synchronization module (red)
DSM‑12/24‑R Dual synchronization module (red)
These speakers are compatible with Wheelock SAFEPATH4 Facility
Communication Systems and Bosch Voice Evacuation Systems.
1
For synchronization, use the SM or DSM modules
with these control panels. The synchronization module
must be set for 24 V operation. When used, the D7022
must be set for 24 VDC operation.
2
When used with a D7039 Multiplex Expansion
Module, the D7024 and FPD-7024 become
addressable fire alarm control panels (FACPs).