Specifications

Bosch Security Systems | 2003-11
EN | 5
VSS7915/00T & VS79155T | Installation Instructions
Sunken mount
• Using the inside of the frame plate as a template, mark the
position of the hole required for the unit.
• Cut out the center hole.
•Use the four tamper-resistant screws (4 x 50mm) and clips to attach
the frame plate to the surface (use the outer holes).
• If you want to mount the mounting box directly onto a wall
instead, break out the four tabs in the mounting box and drill
holes for the four 3.5 x 25mm screws (use plugs if necessary).
Four tamper-resistant
screws 4 x 50mm with clips
Four short screws
Frame plate
Tamper-resistant screw 3 x 10mm
Mounting box
EazeoVideoIntercom.book Page 5 Thursday, December 18, 2003 5:57 PM