operation manual

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre/bevel angles of up to
45°. Note the saw blade recommendations.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch locking mechanism
(2)
On/off switch
(3)
Dust extraction hose
A)
(4)
Extraction outlet
(5)
Base plate
(6)
Sawdust blower device switch
(7)
Guide roller
(8)
Saw blade
A)
(9) Viewing window for CutControl
A)
(10) Base for CutControl
A)
(11)
Shock protection guard
(12)
Handle (insulated gripping surface)
(13)
Saw blade receptacle
(14)
Anti-splinter guard
A)
(15)
Accessory holder
(16)
Bracket for guide roller
(17)
Screw
(18)
Scale for mitre angles
(19)
Cut mark 0°
(20)
Cut mark 45°
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Jigsaw PST 65 PST 650 PST 670
Article number
3 603 CA0 7.. 3 603 CA0 7.. 3 603 CA0 7..
CutControl
● ● ●
Rated power input W 500 500 500
No-load stroke rate n
0
min
–1
3100 3100 3100
Stroke mm 20 20 20
Max. cutting depth
– in wood mm 65 65 67
– in aluminium mm 10 10 10
– in steel (unalloyed) mm 4 4 4
Max. cutting angle (left/right) ° 45 45 45
Weight according to EPTA-Procedure 01:2014 kg 1.6 1.6 1.6
Protection class /II /II /II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
PST 65 PST 650 PST 670
Noise emission values determined according to EN62841-2-11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level dB(A)
88 88 88
Sound power level dB(A)
99 99 99
Uncertainty K dB
3 3 3
Wear hearing protection
English | 13
Bosch Power Tools 1 609 92A 49T | (19.09.2018)