Spec Sheet

Intrusion Alarm Systems | DX4010V2 USB/Serial Interface Module

DX4010V2 USB/Serial Interface Module

www.boschsecurity.com

u RS-232/USB connectivity

u Enhanced direct connection for Remote

Programming Software (RPS)

u RJ-16 data bus

u Transparent enclosure

u Diagnostic light emitting diodes (LEDs)

The DX4010V2 USB/Serial Interface Module creates a

local connection between compatible control panels

and approved applications. The module connects to

the control panel’s data bus which provides power and

data.

System overview

The DX4010V2 Serial Interface Module connects to:

1. A control panel’s option or SDI bus through the data

bus connector or terminal block connection.

2. A PC for RPS, BIS, or other third party applications

through an RS-232 or USB connection.

3. A serial printer or parallel printer with a converter

cable box (not shown) through the RS-232 connector

with a compatible control panel. Refer to

Compatibility Information for details.

Functions

RJ-16 Data Bus and RS-232/USB Connectivity

Use the RJ-16 data bus connector for a remote

programming connection. Use the DB9 DTE RS-232

connector to connect to approved RS‑232 devices. Use

a USB-A to USB-B cable to connect to a USB port.

Transparent enclosure

The diagnostic LEDs show through the transparent

enclosure, making troubleshooting easy and

convenient.

Diagnostic LEDs

There are four diagnostic LEDs that provide

information about the transmission and receipt of

data.

Two Red LEDs Function

BUS RX Receiving data from control panel

PAGE 1
Intrusion Alarm Systems | DX4010V2 USB/Serial Interface Module DX4010V2 USB/Serial Interface Module www.boschsecurity.com The DX4010V2 USB/Serial Interface Module creates a local connection between compatible control panels and approved applications. The module connects to the control panel’s data bus which provides power and data.
PAGE 2
| DX4010V2 USB/Serial Interface Module BUS TX Transmitting data to control panel SDI Bus Control Panels (version 6.0 or higher) Two Green LEDs Function United States SER RX Receiving data from serial device • All G Series control panels • D7212, D7412, D9412 • D9112 SER TX Transmitting data to serial device Australia • D9412GV2-AU DIP Switches Use the external DIP switches to easily assign an address to the DX4010V2 Serial Interface Module.
PAGE 3
| DX4010V2 USB/Serial Interface Module Represented by: Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.