Specifications

Bosch Security Systems
DVR4C Remote Viewer | Operation Manual | Configuration Tool EN | 11
5 Configuration Tool
The Configuration Tool allows an administrator to
configure the DVRs connected to the network and their
associated cameras.
5.1 Registering a DVR
1. Click the Add button in the left bottom corner.
2. Enter a DVR Name for local use, a User name, and a
Password.
> The name can be up to 30 characters long.
> The default values of User name/Password are
admin/
admin.
3. Select either a Ethernet or dial-in connection for the
DVR you want to register.
> A phone number is required for a dial-in connection.
4. Enter an IP Address and a Port number or click
Auto-detect and select an IP address from the list.
5. Click OK.
5.2 Login and configuration
1. Select a DVR in the list of DVRs.
2. Enter the password and click Login.
> The Configuration Tool requires administrator rights to log
on to a DVR. The administrator ID is always
admin. The
password is set in the
Connectivity menu of the
DVR4C.
> If a DVR's configuration menu is activated or remote setup
is configured as
Disable, login is blocked.
When you log in, nine tabs are shown:
•Information
• Camera
•Recording
• Event setup
• Profiles
• System settings
• Connectivity
•Disk manager
•Security
Each of these tab pages allows you to configure different
functions of the selected DVR. When you change the
value of an item in any of the tabs, click the Apply button
to confirm the change. Click the Cancel button to
discard changes.
For more information on the settings that can be
changed, refer to the DVR4C Installation Manual.
DVR4x4RemoteViewer.book Page 11 Tuesday, February 15, 2005 9:19 AM