Specifications
Bosch Security Systems
DVR4C Remote Viewer | Operation Manual | Live Viewer EN | 8
3.6 Instant Recording
To quickly record a live image to a local or network
disk, place the mouse cursor on the image and right
click. Click Rec Start for instant recording. REC 00:03
appears in the upper right of the image. To stop
recording, click REC Stop. If you do not stop recording
manually, it stops automatically after ten minutes. The
recording is stored on the disk and in the directory set in
the options menu.
3.7 Event Log
The log screen displays changes in status for each DVR
registered in the list of DVRs. If a DVR is deleted from
the list, the corresponding log will no longer be
displayed.
If a new event is received, it is added at the bottom of
the list which scrolls down automatically. To stop
scrolling, click .
3.7.1 Viewing an event log
1. To view an event log for a specific DVR, select the
DVR in the DVR drop-down list.
2. To view a specific type of event, select the
appropriate filter in the Filter drop-down list.
> Logs can be viewed as ALL, MOTION, INPUT ALARM,
ERROR, STATUS and TEXT.
3.7.2 Viewing live event log images
Double-click an event on the event log list to view live
images associated with that event.
3.7.3 Viewing the recorded event log images
Select an event from the event log list and click .
The Playback Viewer program opens and the images
are played back.
3.8 Options
Click to open the option window with
Display and Instant Recording menu tabs.
In the Display tab, set whether DirectX is to be used for
viewing images and set the caption information for the
images. Select the time and date format to be used for
the caption display.
> DirectX must already be installed on your PC before you
can select it for use.
> Using DirectX improves performance by 30%.
> If the screen flickers when using DirectX, disable it.
In the Instant Recording tab, select the drive and
directory for storing quick recordings. Select the format
type for the recording file.
3.9 AUDIO
Use the drop-down list to select the audio input channel.
The icon is normally blue but flashes when audio is
received. Click the icon to mute the audio. Use the
volume control to set the audio level.
3.10 Relay Out
Use the drop-down list to select a DVR.
An output relay can be turned on or off by clicking .
DVR4x4RemoteViewer.book Page 8 Tuesday, February 15, 2005 9:19 AM