Specifications

Bosch Security Systems
DVR4C Remote Viewer | Operation Manual | Live Viewer EN | 7
3.1.4 Folders
You can use folders and subfolders to organize your list
of DVRs. To create a folder:
1. Right click the mouse in the DVR list window and
select New Folder.
> The New Folder screen appears.
> To create a subfolder right click on an existing folder in the
list.
2. Enter a name for the folder and click OK.
3. Drag and drop DVRs from the list into the folders
and subfolders you have created.
3.1.5 Viewing live images
To see a live image, click a DVR to open it. If required,
fill-in a user name and password. If not shown, click on
a camera to view.
3.2 Group mode
Click the arrow next to the DVR box on the upper right
of the screen and select Group from the drop-down
menu.
3.2.1 Registering a group
1. Click or move the mouse to the group list, right
click and select Add Group.
2. Enter a group name and select the cameras to
include in the group.
> The selected cameras are grouped and shown in the group
list.
> Each group is limited to sixteen cameras.
Edit group information by selecting a group. Click
or select Edit by right clicking the mouse.
3.2.2 Deleting a group
1. Select a group, then click or select Delete by
right clicking the mouse.
2. Click OK to confirm.
3.2.3 Viewing group images
Click the group icon to monitor images. The cameo
display mode is automatically selected according to the
number of cameras within the group.
3.3 Assigning cameos
A cameo is a single camera picture in a multiscreen
display. To assign a camera to a cameo:
1. Click one of the camera view icons
to select a multiscreen view.
2. Click on a DVR.
3. Click on the + beside the DVR name.
> A list of connected cameras appears.
4. Click on the cameo where you want that camera
picture to be shown.
> A border appears around the cameo.
5. Click on a camera.
> The camera picture appears in the cameo.
You can change the position of a cameo by dragging
and dropping it around the viewing area.
3.4 Camera views
To switch the display mode, click one of the camera
view icons to change the cameo
display configuration.
> Single, Quad, 3x3, 12+1 and 4x4 multi-image display
modes are available.
> 3x3, 12+1 and 4x4 multi-image display modes are used
for viewing images from multiple DVR4Cs.
Click or press Alt+Enter for full-screen viewing. To
go back to the previous mode, press Esc or Alt+Enter.
> Double-click an image within any multi-image display to
see it in full-screen mode. To go back to the previous
mode, double-click again.
3.5 Sequencing
1. Set dwell time by clicking .
2. Click the sequence icon .
3. To stop the sequence mode, click again.
> In sequence mode, the time duration can be set between 5
and 60 seconds. Default value is 5 seconds.
> In full-screen mode, cameras are sequenced; in Quad
mode, DVRs are sequenced.
DVR4x4RemoteViewer.book Page 7 Tuesday, February 15, 2005 9:19 AM