Specifications

Bosch Security Systems
DVR4C Remote Viewer | Operation Manual | Archive Player EN | 13
6 Archive Player
When you archive stored data from the DVR, the
Archive Player software program is copied together
with the data. This program allows you to playback the
copied images without having to install the remote
software.
The Archive Player does not need to be installed on the
PC. Just run the program and retrieve the copied data
for playback. To enhance the image quality, you can use
DirectX. To enable or disable DirectX, right click the
image and select DirectX.
To run the Archive Player, double-click the icon from
the location where the data was stored. Click the Open
file
button of the Archive Player, select a file for
playback and click OK. The start and end time of the file
are shown on the status bar at the bottom of the
window.
If the archived file is in .dv4 format, there can be upto
four video streams in the file. The first channel is
displayed by default. To select a different channel, right
click the image and move the cursor onto Channel. You
can now choose one of the available channels from the
list.
Click the audio icon to turn the sound on and off.
Adjust the volume as required.
The remaining function buttons are Play, Reverse Play,
Pause, Backward Step, Forward Step, Save, Print,
Athentication check.
• Play: Replay the copied file.
• Reverse Play: Play Reverse
• Pause: Pause the playback
• Backward Step: Backwards replay of images
frame by frame
• Forward Step: Replay frame by frame
• Save: Store the currently displayed image as a
still image. Before the capture, you can add a
comment to the image.
• Print: Print the currently displayed image as a
still image. Before printing, you can add a comment
to the image.
• Authentication check: Click to authenticate the
recorded video. If corrupt images are found, they are
shown in the result box.
DVR4x4RemoteViewer.book Page 13 Tuesday, February 15, 2005 9:19 AM