EazeoRecorderInstalC.
EazeoRecorderInstalC.book Page 2 Friday, August 20, 2004 2:02 PM ENGLISH......................................................................................................................................................................................... 3 FRANÇAIS .................................................................................................................................................................................. 25 DEUTSCH.....................................................
EazeoRecorderInstalC.book Page 3 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Table of Contents 1. 2. 3. 4. SAFETY PRECAUTIONS .........................................................................................................................................................5 1.1 IMPORTANT SAFEGUARDS .......................................................................................................................5 1.2 FCC INFORMATION ..................................
EazeoRecorderInstalC.book Page 4 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Table of Contents 4.6 BUZZER MENU ............................................................................................................................................ 16 4.7 ARCHIVE MENU ........................................................................................................................................... 17 4.8 NETWORK MENU ...................................................
EazeoRecorderInstalC.book Page 5 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 1 1 SAFETY PRECAUTIONS Danger The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of an uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
EazeoRecorderInstalC.book Page 6 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 1.2 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EazeoRecorderInstalC.book Page 7 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 7 2.2 Front panel 9 ENTER: Press to confirm a selection or a changed data value. 1 REC: Press to start recording (red light in key lights when unit is recording). 10 MENU: Press to enter or leave the setup menu. 11 Remote control IR receiver window. 2 OSD: - Press once to display the time/date, disk usage and playback rate.
EazeoRecorderInstalC.book Page 8 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 8 2.3 Rear panel REC: A high level external recording request signal* applied to this pin starts recording. When the signal drops to low, recording stops. No connections. 2.3.1 Power Connect the power suppy cable to the power socket at the rear of the unit. Use the power switch to switch the unit ON or OFF.
EazeoRecorderInstalC.book Page 9 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 9 2.4 Interconnections • Connect the VCR output of the multiplexer to the BNC socket marked Video In on the rear of the DVR. • Connect the VCR input of the multiplexer to the BNC socket marked Video Out on the rear of the DVR. • To synchronise switching with the multiplexer connect the VEXT and GND connections on the rear of the unit to the connector of the multiplexer.
EazeoRecorderInstalC.book Page 10 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 10 2.4.2 Quads • Connect the video output of the multiplexer to the BNC socket marked Video In on the rear of the DVR. • In the system menu set the multiplexer item to Off. To connect a quad with a VCR output, refer to the multiplexer connections. The drawing below shows how to connect a quad without a VCR output to the DVR.
EazeoRecorderInstalC.book Page 11 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 11 2.4.3 Single camera • The drawing below shows how to connect a single to the DVR. • • • Connect the monitor to the BNC socket marked Video Out on the rear of the DVR. Connect the video output of the camera to the BNC socket marked Video In on the rear of the DVR. • Connect the audio output of the camera to the socket marked Audio In on the rear of the DVR.
EazeoRecorderInstalC.book Page 12 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 2 EN | 12 2.5 Remote control unit 2.6 Networks The remote control unit is an accessory that makes it easy to control the DVR from a distance. You can carry out the main operations using the remote control unit. The network connection uses the 10BaseT standard. Make sure that your network card supports this standard.
EazeoRecorderInstalC.book Page 13 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 3 3 Operation 3.1 Quick Install In the quick install mode you can quickly change the date, time, recording quality and IPS setting using the LCD display and the Jog Dial. • Press the MENU key for 5 seconds to enter the quick install mode. The Year flashes on the LCD display. • Turn the Jog Dial to change the Year value and then press the ENTER key. The Month flashes on the LCD.
EazeoRecorderInstalC.book Page 14 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 3 3.5 Search playback Segment Search Playback • Press the Search key to enter the Search menu. • Move the cursor to BY SEGMENT LIST and press the Enter key to select file search. • Move the cursor to the segment you want to playback (pAlarm: Pre-alarm record, Timer: Timer record). • If the selection list is full, turn the Jog Dial clockwise to select the next page list.
EazeoRecorderInstalC.book Page 15 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 4 4 EN | 15 Menu set-up 4.3 Normal record menu When system has been connected as described: • Switch power on • The display lights if power is normal. • Allow some time for the system to load. • Press the MENU key to enter the MAIN MENU. When the main menu is displayed you see the different submenus where the settings can be changed.
EazeoRecorderInstalC.book Page 16 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 4 EN | 16 ALARM DURATION TIME: Alarm recording starts from the beginning of alarm and stops at the end of the duration or when alarm reset is activated. The max. duration is non-stop, the min. duration is 10 seconds. PRE-ALARM OPERATION: ON: Record the picture in pre-alarm recording speed in prealarm period. OFF: No pre-alarm recording before alarm occurs.
EazeoRecorderInstalC.book Page 17 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 4 EN | 17 4.
EazeoRecorderInstalC.book Page 18 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 4 EN | 18 4.9 System setting menu If you set the multiplexer make to UNKNOWN, you can adjust the field code line of the connected multiplexer between 0 and 20. The default (13) is suitable for most multiplexers. If the field code line appears at the top of the playback channels, decrease the value. If multiplexers do not playback correctly, increase the value.
EazeoRecorderInstalC.book Page 19 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 5 5 EN | 19 View via Internet/Intranet 5.1 Login Open your internet browser and enter the network IP address (for example, http://192.168.10.5). This must be the same IP address as set in the DVR Network Menu. 5.2 Main Screen The icon at the bottom of the screen is for logging out. Information regarding the status of the system is also shown at the bottom of the screen.
EazeoRecorderInstalC.book Page 20 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 5 EN | 20 5.2.1 Status message color • The color of the status message indicates whether you are working locally or remotely. If you are working locally, the messages are colored yellow. If you are controlling the DVR directly (you have selected the CONTROL icon), the messages are colored green.
EazeoRecorderInstalC.book Page 21 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 6 6 EN | 21 Specifications 6.1 RS-232 interface The DVR can be controlled by a computer or a terminal via the standard D-SUB 9-pin RS-232 connector.
EazeoRecorderInstalC.book Page 22 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 6 EN | 22 6.2 Recording time Approximate recording times in hours without audio when recording with a 160-GB hard disk. PAL Recording Rate (IPS) 50 25 12 8 5 2 1.6 1.0 0.5 0.2 0.
EazeoRecorderInstalC.book Page 23 Friday, August 20, 2004 2:02 PM DVR1C1161 | Installation Manual | Chapter 6 EN | 23 6.3 Technical specifications Video Format Input Output Compression Resolution Display General PAL/NTSC 1 camera input (BNC), 1Vpp, 75Ohm 1 video output (BNC) for main monitor, 1Vpp, 75Ohm M-JPEG 720 x 576 (PAL) / 720 x 484 (NTSC) Full display for live and playback Audio Connections 2 mono inputs, 1.6Vpp ±200mV@10K 2 mono outputs, 1.
EazeoRecorderInstalC.
EazeoRecorderInstalC.book Page 2 Friday, August 20, 2004 2:02 PM Bosch Sicherheitssysteme GmbH Bosch Security Systems B.V. Ludwig-Bölkow-Allee P.O. Box 80002 85521 Ottobrunn 5600 JB Eindhoven Germany The Netherlands www.bosch-sicherheitssysteme.de www.boschsecuritysystems.com 3122 165 22901 04-27 © 2004 Bosch Security Systems B.V. Subject to change. Printed in Taiwan.
