Installation manual

Bosch Security Systems | 2004-11
DVR1A1081 | Installation Manual | Chapter 5 EN | 21
5.3 Technical specifications
Video
Format PAL/NTSC
Input 1 camera input (BNC), 1Vpp,
75Ohm
Output 1 video output (BNC) for main
monitor, 1Vpp, 75Ohm
Compression M-JPEG
Resolution 720 x 576 (PAL) /
720 x 484 (NTSC)
Display Full display for live and playback
Alarm
Input Switching voltage High: > 2 Vdc
Switching voltage Low: < 0.5 Vdc
Output One relay output:
Contact voltage max.: 24 Vdc
Switching current max.: 2A dc
Storage
Hard disk 80 Gb
Recording
Mode Continuous, time-lapse, schedule or
event recording
Rate Max. 50 images per sec. (PAL)
Max. 60 images per sec. (NTSC)
Playback
Rate Max. 50 images per sec. (PAL)
Max. 60 images per sec. (NTSC)
Search Date/time, segment list or event
(alarm)
General
Video loss detection Yes
Power loss detectionYes
Alarm log Yes
User interface Menu-driven
Setup By on-screen display menu
User input device Front panel keypad, remote control
(IR with wired receiver) optional
Image export Built-in Compact Flash slot for
Type I and Type II cards
Security Password protection
Power supply 100 - 240 Vac, 50/60 Hz
Power consumption < 40 W
Timer Weekly timer, built-in real time clock
Control connection RS-232, 9-pin D-Sub connector
Mechanical
Weight approx. 5.5 kg / 11.5 lbs
Dimensions (WxHxD)346 x 88 x 269 mm
13.6 x 3.5 x 10.5 inches
Ambient temperature
Operating+0°C … +40°C
+32°F . . . +104°F
Approvals
Safety
Europe EN60950
USA UL60950 UL & cUL listed
Australia C-Tick
Electro Magnetic Compatibility (EMC)
Europe EN55022 Class B, EN50130-4
USA FCC part 15, class B
Australia AS/NZS 3548
Specifications may change without notice. If you have
any problems, contact your dealer.
EazeoRecorderInstalA.book Page 21 Tuesday, November 23, 2004 3:47 PM