EazeoRecorderInstalA.
EazeoRecorderInstalA.book Page 2 Tuesday, November 23, 2004 3:47 PM ENGLISH......................................................................................................................................................................................... 3 FRANÇAIS .................................................................................................................................................................................. 23 DEUTSCH..................................................
EazeoRecorderInstalA.book Page 3 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Table of Contents 1. 2. 3. 4. SAFETY PRECAUTIONS .........................................................................................................................................................5 1.1 IMPORTANT SAFEGUARDS .......................................................................................................................5 1.2 FCC INFORMATION ...............................
EazeoRecorderInstalA.book Page 4 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Table of Contents 5. SPECIFICATIONS ................................................................................................................................................................... 19 5.1 RS-232 INTERFACE ................................................................................................................................... 19 5.1.1 RS-232 control protocol .................
EazeoRecorderInstalA.book Page 5 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 1 1 SAFETY PRECAUTIONS Danger The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of an uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
EazeoRecorderInstalA.book Page 6 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 1.2 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EazeoRecorderInstalA.book Page 7 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 7 2.2 Front panel 1 REC: Press to start recording (red light in key lights 9 ENTER: Press to confirm a selection or a changed when unit is recording). data value. 2 OSD: - Press once to display the time/date, disk usage and playback rate. - Press a second time to display disk size, record position and play position. - Press a third time to switch off the onscreen display.
EazeoRecorderInstalA.book Page 8 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 8 2.3 Rear panel * Signal - switching voltage High: > 2 Vdc 2.3.1 Power - switching voltage Low: < 0.5 Vdc Connect the power suppy cable to the power socket at the rear of the unit. Use the power switch to switch the unit ON or OFF. GND NC4 NC3 DISKFULL VEXT ALM-CO ALM-NO ALM-NC GND GND NC2 NC1 REC ALM-RST GND ALM-IN - max. input voltage: 12 Vdc 2.3.
EazeoRecorderInstalA.book Page 9 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 9 2.4 Interconnections • The DVR can be connected to a wide range of multiplexers, quads or directly to a camera. 2.4.1 Multiplexers The drawing below shows how to connect a multiplexer to the DVR. • • Connect the monitor to the BNC socket marked Monitor Out on the rear of the DVR.
EazeoRecorderInstalA.book Page 10 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 10 2.4.2 Quads • Connect the video output of the multiplexer to the BNC socket marked Video In on the rear of the DVR. • In the system menu set the multiplexer item to Off. To connect a quad with a VCR output, refer to the multiplexer connections. The drawing below shows how to connect a quad without a VCR output to the DVR.
EazeoRecorderInstalA.book Page 11 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 11 2.4.3 Single camera • The drawing below shows how to connect a single to the DVR. • • Connect the video output of the camera to the BNC socket marked Video In on the rear of the DVR. In the system menu set the multiplexer item to Off. Connect the monitor to the BNC socket marked Video Out on the rear of the DVR.
EazeoRecorderInstalA.book Page 12 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 2 EN | 12 2.5 Remote control unit The remote control unit is an accessory that makes it easy to control the DVR from a distance. You can carry out the main operations using the remote control unit. The keypad functions for the DVR are as follows: RECORD: STOP: PLAY: SEARCH: Press to start recording. Press to stop recording or playback. Press to start playback.
EazeoRecorderInstalA.book Page 13 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 3 3 Operation 3.1 Instant recording Press the Record key to start the recording immediately - the images are recorded on the hard disk. • The recording rate and recording quality are set in the Normal record and Alarm record menus. Press the Stop key to stop recording. • Stop key can only be activated in recording mode.
EazeoRecorderInstalA.book Page 14 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 3 • The alarm image is played back from the pre-alarm period and stops at the end of alarm duration. Date/Time Search Playback • Press Search key to enter the Search menu. • Move the cursor to BY DATE/TIME and press the Enter key to select file search. • Move the cursor to the value you wish to select and press the Enter key.
EazeoRecorderInstalA.book Page 15 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 4 4 EN | 15 Menu set-up 4.3 Normal record menu When system has been connected as described: • Switch power on • Allow some time for the system to load. • Press the MENU key to enter the MAIN MENU. When the main menu is displayed you see the different submenus where the settings can be changed.
EazeoRecorderInstalA.book Page 16 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 4 EN | 16 ALARM DURATION TIME: Alarm recording starts from the beginning of alarm and stops at the end of the duration or when alarm reset is activated. The max. duration is non-stop, the min. duration is 10 seconds. PRE-ALARM OPERATION: ON: Record the picture in pre-alarm recording speed in prealarm period. OFF: No pre-alarm recording before alarm occurs.
EazeoRecorderInstalA.book Page 17 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 4 EN | 17 4.7 Archive menu ARCHIVE MENU PICTURE SIZE TIME STAMP TIME STAMP POSITION WATER MARK WATER MARK POSITITON 720 X 576 ON BOTTOM ON BOTTOM MAIN MENU > PICTURE SIZE: Select picture size for copying image to CF card Big size: 720x576 (PAL), 720x480 (NTSC) Small size: 352x288 (PAL), 352x240 (NTSC) TIME STAMP: ON: Time stamp appears on the picture when copying image to CF card.
EazeoRecorderInstalA.book Page 18 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 4 ERASE DISK: Press Enter to erase all recording from the hard disk. The confirmation dialog box appears on the screen. Select Yes or No and then press ENTER. SYSTEM UPDATE: Press Enter to update the system or not. YES: Copy the update file onto the Compact Flash card on the PC and then insert the Compact Flash card into the slot. Press ENTER key to update the system.
EazeoRecorderInstalA.book Page 19 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 5 5 EN | 19 Specifications 5.1 RS-232 interface The DVR can be controlled by a computer or a terminal via the standard D-SUB 9-pin RS-232 connector.
EazeoRecorderInstalA.book Page 20 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 5 EN | 20 5.2 Recording time Approximate recording times in hours when recording with a 80-GB hard disk. PAL Recording Rate (IPS) Recording Speed (Hour) Lower (15KB) Low (20KB) 50 25 12 8 5 2 1.6 1.0 0.5 0.2 0.
EazeoRecorderInstalA.book Page 21 Tuesday, November 23, 2004 3:47 PM DVR1A1081 | Installation Manual | Chapter 5 EN | 21 5.3 Technical specifications Video Format Input Output Compression Resolution Display General PAL/NTSC 1 camera input (BNC), 1Vpp, 75Ohm 1 video output (BNC) for main monitor, 1Vpp, 75Ohm M-JPEG 720 x 576 (PAL) / 720 x 484 (NTSC) Full display for live and playback Alarm Input Output Switching voltage High: > 2 Vdc Switching voltage Low: < 0.
EazeoRecorderInstalA.