Spec Sheet

Video - DSA E-Series E2800 12-bay
3 | 7
i
Notice
Number of IP cameras refers to default software
configuration (no direct replay mode).
i
Notice
DSAE2800 single controller systems are only
supported by Bosch camera firmware ver-
sion5.75 and later, VRMVideoRecordingMan-
ager version3.70 and later, and Configuration
Manager version5.51 and later.
DSAE2800 dual controller systems require
Bosch camera firmware version6.43 and later,
VRMVideoRecordingManager version3.71 and
later, and Configuration Manager version5.53
and later.
i
Notice
The next business day on-site service level can
only be provided if the respective system has
been registered immediately after receipt and
installation. Otherwise, service will be provided
based on best effort basis.Information about re-
gistration details is available in every shipment
(registration form) or from the Bosch online
product catalog. Next business day services
cannot be provided in every country every-
where. For limitations and exceptions see the
registration details in the registration form.
i
Notice
If the diagnostic cable supplied with the
product is no longer available, please order a
new one via the Bosch After-Sales organization
(order number: F.01U.323.853).
i
Notice
Do not use any other accessories than specified
in the data sheet!
Technical specifications
Electrical requirements 12-bay controller units
Parameter Low range High range
Nominal
voltage
100VAC 240VAC
Frequency 50 to 60Hz 50 to 60Hz
Typical
operating
current
4.51A 1.92A
Electrical requirements 12-bay controller units
Maximum
operating
current
7.2A 2.9A
System rating
plate label
12.0A 6.3A
Electrical requirements 12-bay expansion units
Parameter Low range High range
Nominal
voltage
100VAC 240VAC
Frequency 50 to 60Hz 50 to 60Hz
Typical
operating
current
2.49A 1.16A
Maximum
operating
current
5.3A 2.1A
System rating
plate label
12.0A 6.3A
Power ratings 12-bay controller units (typical operating
power)
KVA 0.451
Watts 451.3
BTU/h 1543.4
Note: For detailed information, see the latest NetApp
E‑Series Site Preparation Guide.
Power ratings 12-bay expansion units (typical
operating power)
KVA 0.25
Watts 248.7
BTU/h 850.55
Note: For detailed information, see the latest NetApp
E‑Series Site Preparation Guide.
Mechanical
Dimensions (HxWxD)
• 12-bay unit
8.68x44.7x53.6cm
(3.41x17.6x21.1in)