Installation Manual

DSA E-Series (E2800 12-bay) Connection | en 29
Bosch Sicherheitssysteme GmbH Installaton manual 2018.02 | V1 | DOC
5 Channel5 / ControllerA and
Channel5 / ControllerB (iSCSI, RJ45
Base‑T)
6 Channel6 / ControllerA and
Channel6 / ControllerB (iSCSI, RJ45
Base‑T)
The Multipathing feature is enabled on dual controller units by default.
Dual controller units support 2different cabling options for the iSCSI ports.
– Default: iSCSI, RJ45 Base‑T
Note:
– Channel5 / ControllerB is the fallback of Channel5 / ControllerA and
Channel 6 / ControllerA is the fallback of Channel6 /. ControllerB
– Alternatively: iSCSI, optical
Note:
– Channel3 / ControllerB is the fallback of Channel3 / ControllerA and
Channel 4 / ControllerA is the fallback of Channel4 /. ControllerB