Installation Manual
Table Of Contents
- Table of contents
- 1 Safety
- 2 Before you begin
- 3 System overview
- 4 Installation
- 5 Connection
- 6 Turning on/off AC power
- 7 Configuring the storage system
- 8 Maintenance
- Blank Page
- Blank Page
- Blank Page
24 en | Connection DSA E-Series (E2800 12-bay)
2018.02 | V1 | DOC Installaton manual Bosch Sicherheitssysteme GmbH
Maximum configuration - dual controller configuration
Controller B
Controller A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A
Notice!
You can connect a 12-bay DSAE2800 controller unit to a maximum of seven 12-bay
DSAE2800 expansion units.
5.2 Connecting the controller unit to the network
In case of a Bosch Video Recording Solution a host is an IP camera. To connect the controller
unit to the Ethernet one or two of two available iSCSI host ports must be connected to the
Ethernet. The iSCSI port connections will then be used by the IP cameras for video data
traffic.