Installation Manual
Table Of Contents
- Table of contents
- 1 Safety
- 2 Before you begin
- 3 System overview
- 4 Installation
- 5 Connection
- 6 Turning on/off AC power
- 7 Configuring the storage system
- 8 Maintenance
- Blank Page
- Blank Page
- Blank Page
DSA E-Series (E2800 12-bay) Connection | en 23
Bosch Sicherheitssysteme GmbH Installaton manual 2018.02 | V1 | DOC
5 Connection
5.1 Connecting the expansion units
The expansion units are shipped with the appropriate number of SAS cables.
To connect the components:
4 Connect the SAS cable from the SAS port on the controller unit to the SAS port on the
expansion unit.
One expansion unit - single controller configuration
Controller A
IOM B
IOM A
One expansion unit - dual controller configuration
(recommended cabling for maximum throughput)
Controller B
Controller A
IOM B
IOM A
Three expansion units - dual controller configuration
Controller B
Controller A
IOM B
IOM A
IOM B
IOM A
IOM B
IOM A