Data Sheet
Configuration Information
(RAID-6)
Net Capacity (GB)
Simplex Controller Unit (8 x 2 TB) 11172
Simplex Controller Unit
(12 x 2 TB)
18620
Dual Simplex Controller Unit
(12 x 2 TB)
18620
12-bay Expansion Unit
(12 x 2 TB)
18620
60-bay Expansion Unit
(60 x 3 TB)
139700
Performance data per controller unit in a 10 Gbit/s
network (in a 1 Gbit/s network the available network
bandwidth is the limiting factor):
Network Uplink 10 GbE (RAID-5 / RAID-6)
iSCSI
Sessions
Bandwidth
Mbps
(Base Unit
12 x HDD)
Bandwidth Mbps
(min. 1 x Base Unit + 1 x
Expansion Unit:
24 x HDD)
Single
port
400 650 / 150 1050 / 200
Dual
port
800 (400
per port)
650 / 150 1050 / 200
Note: The overall bandwidth is per controller and does
not depend on the number of used ports. The number
of cameras will double by using two ports instead of
one port.
Notice
iSCSI session specifications refer to the total
number of recording and replay sessions.
Bandwidth data refer to <Recording> / <Replay>.
The maximum overall bandwidth of a Dual Simplex
Controller system is 2500 Mbps read/write
throughput in a 10 GbE uplink network.
Notice
DSA E2700 units are only supported by Bosch
Firmware 5.60 and later, VRM 3.0 and later, and
Configuration Manager 5.32 and later.
Notice
The next business day on-site service level can
only be provided if the respective system has
been registered immediately after receipt and
installation. Otherwise, service will be provided
based on best effort basis.
Information about registration details is available
in every shipment (registration form) or from the
Bosch online product catalogue.
Next business day services cannot be provided in
every country everywhere. For limitations and
exceptions see the registration details in the
registration form.
Dimensions controller unit and 12-bay expansion unit
Front view controller unit
1 End Caps (the Left End Cap
has the Controller-Drive Tray
Summary LEDs)
2 Drive Canisters
Rear view Dual Simplex Controller unit
1
2
1
2
1 Controller Canister 2 Power-Fan Canister
3 | DSA E-Series 2TB (E2700)