User guide

DS7446KP | User Guide | 10.0 PIN Commands
26 Bosch Security Systems | 12/04 | 4998149924B
Follow these steps to add a new user PIN:
1. Assign one or more areas to the new user.
a. Press [# Command][5][6].
b. Press [3] to assign one or more areas to the new user.
The display scrolls through the user numbers.
c. Enter a user number and then press [*].
For example, press [5][*] for User 5.
d. Press the corresponding numeric keys to add, or remove, areas.
For example, to add Area 2, press [2].
e. Press [# Command] twice to return to the [# Command][5][6]
menu.
2. Assign an authority level to the new user.
a. Press [2] to assign an authority level.
The display scrolls through the user numbers.
b. Enter a user number and then press [*].
For example, press [5][*] for User 5.
c. Enter an authority level from 1 to 4.
Level 1 grants the most authority. Level 4 grants the least
authority.
For example, to assign Level 2 authority, press [2].
d. Use Table 13 on page 27 to identify the available commands for
each authority level.
e. Press [# Command] twice to return to the [# Command][5][6]
menu.
3. Assign a PIN to the new user.
a. Press [1] to assign a PIN.
The display scrolls through the user numbers.
b. Enter a user number and then press [*].
For example, press [5][*] for User 5.
c. Enter a PIN. Re-enter as asked.
d. Press [# Command] three times to exit this command.
The new user is added to the system.